|
TM
i730 Boost Mobile
Phone User’s Guide
Receiving Calls ..............................................22
Ways to Enter a Number................................22
Missed Phone Calls .......................................25
Using Mute.....................................................26
Making Emergency Phone Calls....................26
Contents
Introduction................................................1
Welcome to Boost MobileTM - Wireless for a
New Generation............................................... 1
Getting Started...........................................3
Removing the Battery Door ............................. 5
Battery .............................................................7
Powering On and Off ....................................... 9
Enabling Over-the-Air Security ........................ 9
Finding Your Phone Number ......................... 10
Phone Basics................................................. 11
SIM Security .................................................. 15
Locking the Keypad ....................................... 17
Accessories ...................................................18
Call Alerts ................................................ 27
Sending Call Alerts ........................................27
Receiving Call Alerts......................................27
Using the Call Alert Queue ............................27
Recent Calls............................................. 29
Storing Recent Calls to Contacts ...................29
Deleting Recent Calls ....................................30
Entering Text ........................................... 31
Using Alpha Mode..........................................31
Using Word Mode ..........................................31
Special Function Keys ...................................32
Using Numeric Mode .....................................33
Using Symbols Mode.....................................33
Please contact Boost Mobile Customer Care for
information on this service ............................. 18
Re-Boost........................................................ 18
Instant Re-BoostTM ................................................... 19
Boost Mobile Customer Care......................... 19
Making Calls.............................................21
Contacts................................................... 35
Phone Calls ...................................................21
Viewing Contacts ...........................................36
i
Creating Entries ............................................. 36
Storing Numbers Faster................................. 38
Editing Entries................................................ 38
Deleting Entries ............................................. 39
Checking Capacity......................................... 39
Creating Pauses and Waits ........................... 39
International Numbers ................................... 40
Call Forwarding....................................... 55
Forwarding All Calls.......................................55
Turning Off Call Forwarding...........................55
Forwarding Missed Calls................................55
Viewing Call Forwarding Settings ..................56
®
Java Applications ................................. 57
Running Applications .....................................57
Suspending Applications................................57
Resuming Applications ..................................57
Ending Applications .......................................58
Downloading Applications..............................58
Installing Applications ....................................58
Deleting Applications .....................................58
Managing Memory .........................................59
Shortcuts on the Main Menu ..........................59
Java Applications and GPS Enabled .............60
Memo ........................................................41
Boost Mobile Voice Mail..........................43
Setting Up Your Voice Mail Box.....................43
Playing Messages.......................................... 43
Changing Your Password .............................. 44
Recording Your Name ................................... 44
Recording Your Active Greeting .................... 44
Advanced Voice Mail Features ...................... 45
Messages .................................................51
Message Notifications....................................51
Voice Mail ...................................................... 52
Boost MobileTM Text and Numeric Messages52
Web Alerts ..................................................... 54
Ring Tones............................................... 63
Setting Your Phone to Vibrate .......................63
Assigning Ring Tones to Contacts.................64
Ring and Vibrate ............................................64
Viewing Ring Tone Assignments ...................64
ii
Downloading More Ring Tones .....................64
Managing Memory ......................................... 65
Deleting Custom Ring Tones......................... 65
Advanced Calling Features.................... 81
Putting a Call on Hold ....................................81
Calling 2 People.............................................81
Making International Calls..............................82
Setting One Touch Boost Walkie-Talkie ........82
Setting Flip Actions ........................................83
Call Timers.....................................................83
Making TTY Calls...........................................84
Special Dialing Codes....................................85
Additional Phone Features.............................86
GPS Enabled ............................................67
IMPORTANT: Things to Keep in Mind........... 67
Making an Emergency Call............................68
Viewing Your Approximate Location.............. 69
Enhancing GPS Performance........................ 70
Updating Satellite Almanac Data ................... 72
Setting Privacy Options ................................. 72
Using GPS with Map Software ...................... 74
Datebook.................................................. 89
Viewing Datebook..........................................89
Creating Events .............................................90
Editing Events................................................92
Deleting Events..............................................92
Receiving Reminders.....................................93
Making Calls From Datebook.........................93
Customizing Datebook Setup ........................94
TM
Boost Mobile Wireless Web Services 77
Starting the Microbrowser.............................. 77
Voice Records..........................................79
Creating Voice Records................................. 79
Playing Voice Records................................... 79
Labeling Voice Records................................. 79
Deleting Voice Records ................................. 80
Locking Voice Records.................................. 80
Managing Memory ......................................... 80
Shortcuts ................................................. 95
Creating a Shortcut........................................95
iii
Using a Shortcut ............................................ 95
Editing a Shortcut .......................................... 95
Deleting Shortcuts ......................................... 96
Understanding Status Messages......... 111
TM
Boost Mobile Terms and Conditions of
Service ................................................... 115
Customizing Your Phone........................97
Setting the Volume ........................................97
Setting Your Phone to Vibrate ....................... 97
Using a Headset ............................................ 97
Changing the Look of Your Phone.................98
Temporarily Turning Off Calls........................ 99
Using Settings................................................ 99
Safety and General Information........... 125
RF Operational Characteristics....................125
Portable Radio Product Operation and EME
Exposure......................................................125
Electro Magnetic Interference/Compatibility 128
Medical Devices...........................................128
Operational Warnings ..................................129
Operational Cautions ...................................130
Accessory Safety Information ......................131
Boost Mobile Customer Care ...............105
Profiles ...................................................107
Viewing Profiles ........................................... 107
Switching Profiles ........................................ 107
How Changing Settings Affects Profiles ...... 107
Temporary Profiles ......................................108
Creating Profiles .......................................... 109
Editing Profiles.............................................109
Deleting Profiles........................................... 109
Setting Call Filtering..................................... 110
MOTOROLA LIMITED WARRANTY...... 133
Patent and Trademark Information...... 137
Index....................................................... 139
iv
Note: This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation.
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
Hereby declares that the product:
Product Name: i730
Model Number: H63XAN6RR4AN
• Reorient or relocate the receiving
antenna.
Conforms to the following regulations:
• Increase the separation between the
equipment and receiver.
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Class B Digital Device
• Consult the dealer or an experienced
radio/TV technician for help.
v
vi
Introduction
Welcome to Boost MobileTM
-
Wireless for a New Generation
With Boost Mobile pre-paid, there’s no need to worry
about credit checks or chalking up huge monthly bills,
because quite simply, there aren’t any. By paying for
your phone calls up front, you’ll keep control of your
monthly costs and get all the mobile freedom you
really want.
And Boost Mobile has got the latest Motorola
handsets with the coolest features, like BoostTM
Walkie-Talkie, BoostTM Wireless Web, and Text
Messaging. Plus, you get instant access to Nextel’s
world-class digital iDEN network.
1
2
Getting Started
p
O
Power button.
t
.
Acts like s when the flip is closed; turns
Boost Walkie-Talkie speaker on and off;
used with voice names and voice records.
Navigation key — press the arrows to
scroll through menus and lists.
Acts like e when the flip is closed;
accesses recent calls; sends incoming
calls to voice mail.
OK key — selects highlighted item;
answers calls.
Menu key — accesses context-sensitive
menus.
m
A
To start using your i730 phone:
Option key — selects the option appearing
above it on the display.
•
•
•
•
Make sure your SIM is in place.
Charge the battery.
Note: Throughout this User’s Guide, the
option keys will be represented by
A.
Activate your service.
Enable over-the-air security.
s
e
Send key — places phone calls.
End key — ends phone calls; returns to
idle screen; in browser mode, returns to
Web main menu.
4
Removing the Battery Door
Inserting and Removing Your SIM
Removing the Battery Door
1 Make sure the phone is powered off. See
“Powering On and Off” on page 9.
2 Slide the release button back until it releases the
battery door.
The SIM is designed for optimal Contacts storage
and feature use. For Boost MobileTM SIM
compatibility information, visit
www.boostmobile.com/cs_faqs_thesimcard.html.
If you remove your SIM and use it with another
phone, or use another SIM with your phone, the
following information is erased:
•
•
•
•
•
•
•
•
•
The recent calls list
Call forwarding settings
Web alerts
speaker
Information stored in Memo
3 most recent GPS Enabled locations
Voice records
Voice names
3 Allow the battery door to pop up, slide it forward,
and remove it from the back of your phone.
Datebook events
Options set using the Personalize menu
Note: In some cases, Contacts may not be
accessible if you move your SIM to another
phone. Contacts entries created with your
i730 phone are not readable by an older
iDEN SIM-based phone.
5
Getting Started
Inserting Your SIM
Removing Your SIM
Important: To avoid loss or damage, do not remove
your SIM from your phone unless
absolutely necessary.
1 With your phone powered off, remove the battery
door and battery.
2 Hold your SIM as shown.
1 With your phone powered off, remove the battery
door and battery.
2 While holding the tab down, slide your SIM out of
the SIM holder.
cut corner
3 Carefully slide your SIM into your phone until it
lines up with the marks above and below the SIM
card holder.
SIM holder
SIM holder
Note: Protect your SIM as you would any delicate
object. Store it carefully.
6
Battery
3 Replace the battery door and press it gently until
you hear a click.
Battery
Inserting the Battery
Your phone comes with a Standard Lithium Ion
Battery.
1 With the phone powered off, remove the battery
door.
2 Insert the top of the battery into the battery area.
Press the bottom of the battery to secure it.
Charging the Battery
Your phone comes with a rapid travel charger.
1 Plug the charger into an electrical outlet.
2 Open the connector cover.
connector
cover
7
Getting Started
3 Plug the other end of the charger into the
accessory connector.
Recommended charging times:
Battery
Charger
Rapid
Standard
3 hours
4 hours
Slim
2 hours
2 hours
Standard
Lithium Ion
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to 40°C).
Prolonged charging is not recommended.
Removing the Battery
Charger Attached appears on the full-sized
display.
1 With the phone powered off, remove the battery
door.
2 Remove the battery by pushing the battery toward
the antenna and lifting it out.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides of
the plug. Pull the plug straight out.
4 If you have purchased optional batteries or
chargers, see “Charging Times”.
Charging Times
See your Lithium Ion battery and travel charger to
determine the appropriate charging time.
8
Powering On and Off
As your phone connects to the network, you will see
a connecting message. When the idle screen
appears, the phone is ready to use.
Battery Use and Maintenance
•
The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
BOOST
•
Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
•
•
Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
The battery capacity is degraded if the battery is
stored for long periods while fully charged. If long
term storage is required, store at half capacity.
To power the phone off:
1 Open the flip.
2 Press and hold p.
Powering On and Off
To power your phone on:
Enabling Over-the-Air Security
To receive Over-the-Air Radio Service Software
(OARSS) Security you must enable security the first
time you power on your phone or within 20 days of
first activation of your phone.
1 Open the flip.
2 Press p.
1 Press A under Ok.
9
Getting Started
Note: If you press A under Later, the idle screen
will appear. The next time you select Web
from the main menu, you will be prompted
to enable security before you can use
Finding Your Phone Number
1 Press m to access the main menu.
2 Scroll to My Info.
3 Press O.
Boost MobileTM Wireless Web services.
2 You are prompted to enable security. Press A
under Yes. A series of screens and then the
default homepage displays.
4 Scroll to see your information:
•
Name — Enter your name. See “Entering Text”
on page 31.
3 Press e to return to the idle screen.
•
Line 1 — your phone number is filled in when
you receive your first Web alert after enabling
over-the-air security on your phone.
Within 24 hours of enabling security, you will receive
a Web alert containing your Personal Telephone
Number (PTN), Boost MobileTM Customer Care
number, and BoostTM Walkie-Talkie number.
•
•
Direct Connect (Boost Walkie-Talkie) —
Your Boost Walkie-Talkie is the number that
others use to contact you using Boost
Walkie-Talkie service. It is filled in when you
receive your first Web alert after enabling
over-the-air security on your phone.
Carrier IP — The IP address assigned to
Boost Mobile. It is filled in when you activate
your phone.
1 When you receive a Web alert saying New
Browser Message - Receive Programming
Info, press A under Goto.
2 You are prompted to accept changes to your lists.
Press A under Ok.
3 You are prompted again to accept changes to
your lists. Press A under Ok.
4 A confirmation screen displays. Press A under
Ok.
•
•
IP1 Address — The IP address assigned to
you for using the Internet with your phone.
Ckt — Your circuit data number is the number
you use if you want to use your phone to
transfer circuit data. You receive this number
from Boost Mobile Customer Care.
5 Press e to return to the idle screen.
10
Phone Basics
•
Service Status — This information may be
used by Boost Mobile Customer Care if there is
a problem with your phone’s services.
The one-line display shows a shortened version of
the full-sized display. To see more information, open
the phone cover.
status icons
Boost MobileTM Voice Mail
You must set up your voice mail box before you can
retrieve messages. See “Setting Up Your Voice Mail
Box” on page 43.
text area
BOOST
menu icon
Customizing Features
display options
You can control many features of your phone,
including the size of the text on the display, the way
you access main menu items, and the volume of
incoming sound, rings, and other tones. See
“Customizing Your Phone” on page 97.
The screen shown above is the idle screen. The idle
screen appears when your phone is on, but not
engaged in any activity.
Phone Basics
Any time your phone is powered on, the display
provides you with information and options.
Text Area
This area displays menus, messages, names,
phone numbers, and other information.
Display Options
Two display options appear at the bottom of most
screens. You select a display option by pressing the
option key below it.
11
Getting Started
Menus and Lists
OK Key
Your phone’s features are arranged in menus,
submenus, and lists.
Pressing O:
•
•
•
•
•
Selects the highlighted menu item or list item
Sets options
To access the items in a menu or list, scroll using
the navigation key at the top of your keypad. This
key lets you scroll up, down, left, or right. Holding
down the appropriate part of the navigation key
speeds up scrolling.
Confirms actions
Places and answer calls
From the idle screen, accesses ring tones list.
This is the default setting. You can assign a
different main menu item to O.
In this guide, this symbol > tells you to select a menu
or list item. For example, Settings > Security
means:
Menu Key
Many features provide context-sensitive menus that
let you access related features and actions. The S
icon appears any time a context-sensitive menu is
available. Press m to access the menu.
1 Scroll to Settings on the main menu.
2 Press O to see the Settings screen.
3 Scroll to Security.
4 Press O to see the Security screen.
Quick Access to Main Menu Items
Each arrow in the navigation key and O can be
used to access a main menu item from the idle
screen. Each of these keys is assigned to a main
menu item when your receive your phone. To assign
different main menu items, see “Personalize
Features” on page 101.
12
Phone Basics
View personal phone
information, including
phone number and Boost
Walkie-Talkie ID. See
page 10.
Main Menu
My Info
Profiles
j
All your phone’s features can be accessed through
the main menu. You can set the main menu to
appear as a list or as large icons (see “Setting the
Menu View” on page 99).
Groups of settings you
p
l
Web
Access to Boost Mobile
Wireless Web Services.
See page 77.
new profile form apply together. See
a
list of profiles
Profiles menu
page 107.
n
Re-Boost
Recharge your account
from your handset.
GPS
Find your approximate
geographical location. See
page 67.
Java Apps
Java applications on your
phone. See page 57.
q
m
Shortcuts
Create shortcuts to
screens. See page 95.
s
c
k
Ring Tones
VibeAll
Assign ring tones and turn
ringer off. See page 63.
Voice Record
Record and play audio
messages. See page 79.
list of ring tones
Ring Tones menu
Call Alert
list of call alerts
Call Alerts menu
Lists call alerts. See
page 27.
Settings
Customize your phone.
See page 97.
b
Display/Info
Phone Calls
DC(Walkie-Talkie)
Options
Contacts
Create, view, store, edit
new contact from contacts. See page 35.
list of contacts
d
Personalize
Volume
Security
Advanced
Contacts menu
13
Getting Started
Status Icons
Messages
Voice Mail
Web Alert
Text Msgs
Access messages. See
page 51.
e
i
Status icons appear at the top of the display. Some
appear at all times. Others appear only when your
phone is engaged in certain activities or when you
have activated certain features.
Recent Calls
list of calls
recent calls menu
Call Setup menu
Lists recent calls. See
page 29.
Battery Strength — A fuller battery
bbcd
efgd
opqrs
indicates a greater charge.
Call Timers
Phone usage information.
See page 83.
h
f
o
Signal Strength — More bars next to
the antenna indicate a stronger signal.
Call Forward
Set call forwarding options.
See page 55.
Phone In Use — Your phone is active
A
B
on a phone call.
Datebook
Schedule appointments.
See page 89.
new event form
list of events
Datebook menu
Boost Walkie-Talkie In Use — Your
phone is active on a Boost
Walkie-Talkie call.
Memo
Store a number to access
later. See page 41.
Active Phone Line — 1 indicates
phone line 1 is ready to make calls.
g
1
Call Forward — Your phone is set to
forward calls. See “Call Forwarding” on
page 55.
G J
H K
I L
Ringer Off — Your phone is set not to
ring. See “Setting Your Phone to
Vibrate” on page 63.
MQ
14
SIM Security
SIM Security
Your SIM stores all your Contacts and protects your
personal information. Since this information is stored
on your SIM, not in your phone, you can remove the
information by removing your SIM.
Speaker Off — Sets Boost
u
Walkie-Talkie sound to come through
the earpiece rather than through the
speaker. Your phone does not ring for
Boost Walkie-Talkie if Alert Type is set
to Silent or Vibrate.
Note: Except for making emergency calls, your
Messages — You have one or more
messages. See “Messages” on page
51.
wxT
yz
phone will not function without the SIM.
To prevent unauthorized use of your phone, your
SIM is protected by a PIN that you enter each time
the phone is powered on. You can change the PIN
or turn off the requirement that it be entered.
Internet — You are ready to browse
the internet or are browsing the
internet using a secure connection.
DE
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is off, your phone
can be used without entering a PIN.
Airplane Mode — Your phone is set to
Airplane Mode. See “Using a Headset”
on page 97.
U
Packet Data — You are ready to
transfer packet data or are transferring
packet data.
Y Z
N O
Important: When the SIM PIN requirement is off, the
personal data on your SIM is not
protected. Anyone can use your phone
and access your personal data.
TTY — You are ready to use your
phone to make calls using a
teletypewriter device. See “Making
TTY Calls” on page 84.
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you power on
your phone.
15
Getting Started
Note: If a SIM PIN is required, your phone will not
function until the SIM PIN is entered,
Changing the PIN
Note: The SIM PIN requirement must be turned
except for making emergency calls.
1 From the main menu, select Settings > Security
> SIM PIN.
2 Scroll to On or Off.
3 Enter the current SIM PIN.
1 From the main menu, select Settings > Security
> Change Password > SIM PIN.
2 At the Enter Old SIM PIN screen, enter the
current SIM PIN.
Note: When you receive your phone, the SIM PIN
is 0000. Change your PIN to prevent
fraudulent use of the SIM (see “Changing
the PIN” on page 16).
3 Press A under Ok.
4 At the Enter New SIM PIN screen, enter the new
4- to 8-digit SIM PIN.
5 Press A under Ok.
6 At the Re-enter New SIM PIN screen, re-enter
the new SIM PIN to confirm.
4 Press A under Ok.
Entering the PIN
1 When the Enter SIM PIN Code screen appears
after you power on your phone, enter your SIM
PIN.
7 Press A under Ok.
Changed: SIM PIN displays.
Unblocking the PIN
2 Press A under Ok.
If you enter your PIN incorrectly 3 times, your SIM is
blocked. To unblock your SIM, you must contact
Boost Mobile Customer Care to get a PIN Unblock
Code (PUK).
The message SIM Unlocked displays.
Important: If you enter your PIN incorrectly 3 times,
your SIM is blocked. To unblock your
SIM, you must contact Boost Mobile
Customer Care. See “Unblocking the
PIN”.
16
Locking the Keypad
Important: If you unsuccessfully enter the PUK code
10 times, your SIM is permanently
blocked and must be replaced. If this
happens, all data is lost. You will get a
message to contact Boost Mobile
Locking the Keypad
Locking the phone’s keypad prevents its buttons
from being pressed. When the keypad is locked, you
can only:
Customer Care. Except for making
emergency calls, your phone will not
function with a blocked SIM.
•
•
•
Power the phone on and off
Unlock the keypad
Respond to incoming calls, messages, and alerts
To unblock the PIN:
Important: Emergency calls cannot be placed while
the keypad is locked.
1 Press * # m 1.
2 At your Boost Mobile Customer Care
representative’s request, provide the information
needed to give you a PUK code.
3 Select Unblock PIN.
4 Enter the PUK code.
5 Enter a new 4- to 8-digit SIM PIN.
6 Re-enter your SIM PIN.
To lock the keypad:
1 From the idle screen, press m.
2 Press *.
If you press a key while the keypad is locked,
instructions for unlocking the keypad display briefly.
To unlock the keypad:
Note: These steps must be performed in quick
1 From the idle screen, press m.
2 Press *.
succession.
If you entered the codes properly, SIM Unlocked
appears on the display.
While the keypad is locked, you can respond to
incoming calls, messages, and alerts just as you do
when the keypad is not locked. When finished, press
e to return to the idle screen. The keypad remains
locked.
17
Getting Started
You also have the option of setting your phone to
automatically lock the keypad if there has been no
activity for a specified time.
To order additional accessories, go to
www.boostmobile.com or call 1-888-BOOST-4U
(1-888-266-7848). You can also contact your Boost
Mobile Authorized Dealership. For information on
Boost Mobile retail store locations, go to
www.boostmobile.com.
1 From the main menu, select Settings > Security
> Keypad Lock.
2 To lock the keypad immediately, select Lock
Now. You will be given the option to press m and
* to lock and unlock the keypad.
3 To set a specific time for the keypad to lock if
there has been no activity, select Auto Lock and
then select a time.
Portability: Bringing Your
Phone Number From Another
Carrier
The keypad can be set to lock in 5, 10, 15 or 20
minutes if the keypad is not touched during the
specified time. To turn the auto lock off, repeat
step 3 and select Off.
Please contact Boost Mobile Customer Care for
information on this service.
Re-Boost
You can recharge your account directly from your
handset using the Re-Boost menu option. On your
phone, launch the service from the main menu. You
will then be able to log on and recharge your
account using your credit card or Re-Boost Card.
You can also view your account balance and call
credit expiration date. The account pass code is the
same one that you use to access your account.
Accessories
Your phone comes with a Standard Lithium Ion
Battery, rapid travel charger, and holster.
Various accessories are available for use with your
i730 phone, including cases, vehicle battery
charger, batteries, Hands-Free accessories and
more.
18
Instant Re-BoostTM
Instant Re-BoostTM
You can Re-BoostTM instantly by dialing the letters
ADD from your mobile phone and press Send. You
are not required to enter your PTN or pass code.
If you select Prepaid Card, you will be asked to enter
the 14-digit card number printed on the Re-BoostTM
card. If you've selected Credit Card, you will be
asked simply to confirm your purchase. You will
need to have a credit card already on file to use it for
purchasing airtime. Call 1-888-BOOST-4U to have
your credit card added to your account.
Boost Mobile Customer Care
Boost Mobile Customer Care: 1-888-BOOST-4U
(1-888-266-7848) or dial 611 from your i730 phone.
19
Getting Started
Main Menu
ꢀ
Voice Record
ꢀ
ꢀ
Datebook
[New Event]
ꢀ
Messages
ꢀ
My Info
ꢀ
Web
[New VoiceRec]
Voice Records (if any)
ꢀ
ꢀ
ꢀ
ꢀ
Voice Mail
Net Alert
ꢀ
ꢀ
ꢀ
Name
Line 1
Direct Connect
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Go To Today
Go To Date
Week View
Month View
Setup
ꢀ
ꢀ
Re-Boost
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Label
New
Lock
Add To
Memory
Delete
Delete All
Text Msgs
ꢀ
Memory
Delete All
(Boost Walkie-Talkie)
Java Apps
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Carrier IP
IP1 Address
CKT
Java Applications (if any)
ꢀ
ꢀ
ꢀ
Deinstall
Permissions
License Info
ꢀ
Events (if any)
ꢀ
Recent Calls
Recent Calls (if any)
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Edit
New
ꢀ
Service Status
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Store
Delete
Delete All
Call Alert Queue
Call Setup
ꢀ
Java System
ꢀ
Go To Today
Go To Date
Week View
Month View
Setup
Delete
Copy
Call # in Event
Alert # in Event
ꢀ
Profiles
ꢀ
Reset System
Delete All
ꢀ
Call Alert
Call Alerts (if any)
[New Profile]
Profiles (if any)
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Store
Delete
Delete All
Sort By
Recent Calls
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
View
Edit
New
Delete
Delete All
Setup
ꢀ
Ring Tones
ꢀ
ꢀ
ꢀ
ꢀ
VibeAll On/Off
ꢀ
Call Timers
Available Ring Tones
Vibrate
Silent
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Last Call
Phone Reset
Phone Lifetime
DC (Walkie-Talkie) Reset
DC (Walkie-Talkie) Lifetime
Circuit Reset
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Assign To
Assign w/vibe
Overview
Memory Usage
Delete
ꢀ
Contacts
[New Contact]
ꢀ
ꢀ Memo
ꢀ
ꢀ
GPS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Search
New
Capacity
Filter
Call Setup
ꢀ
ꢀ
ꢀ
Store to Cntcs
Cancel
Delete
ꢀ
ꢀ
ꢀ
Position
Privacy
Interface
Circuit Lifetime
Kbytes Reset
ꢀ
Settings
ꢀ
Call Forward
Shortcuts
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Display/Info
ꢀ
Contacts (if any)
ꢀ
ꢀ
All Calls
- To
[New Entry]
Shortcuts (if any)
Phone Calls
DC (Walkie-Talkie) Options
Personalize
Volume
Security
Advanced
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Edit
New
Search
Delete Contact
Delete Number
Capacity
Filter
ꢀ
ꢀ
Status
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Edit
New
Reorder
Delete
Delete All
Detailed
- If Busy
- If No Answer
- If Unreachable
ꢀ Status
Call Setup
20
With the Flip Closed
Making Calls
Your i730 phone makes two types of calls: digital
cellular phone calls and Boost Walkie-Talkie calls.
With Boost Walkie-Talkie calls, you use your phone
as a long-range, digital walkie-talkie.
1 Select the number you want to call from the
recent calls list and press t. -or-
Use a voice name to select number and place the
call.
2 To end the call, press ..
Phone Calls
With the Flip Open
Dialing Boost Walkie-Talkie Numbers
Every Boost Walkie-Talkie number has 3 parts — an
area ID, a network ID, and a member ID — with an
asterisk between each of these parts. For example:
999*999*9999.
1 Enter the number you want to call.
2 To place the call:
Press s. -or-
When you place a Boost Walkie-Talkie call, you
must enter the whole Boost Walkie-Talkie number
including the asterisks.
If you entered the number from the idle screen,
press O.
3 To end the call:
Press e. -or-
Close the flip.
Tip: When you store a Boost Walkie-Talkie
number in Contacts it is good practice to
include the whole Boost Walkie-Talkie
number including the asterisks in case you
travel with your phone, or another Boost
Walkie-Talkie user whom you are trying to
reach travels with their phone, outside of
your network.
To end a call by closing the flip, you must have the
Flip to End feature turned on (see “Setting Flip
Actions” on page 83).
21
Making Calls
Ending
If the flip is closed, press ..
Receiving Calls
Phone Calls
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Press e. -or-
Close the flip.
Answering
Ways to Enter a Number
If the flip is closed, press t. -or-
Open the flip. -or-
•
•
•
•
•
•
•
•
Use the numbers on the keypad
Select the number from the recent calls list
Select the number from Contacts
Select a number stored in Datebook
Redial the last phone number called
Say a voice name into your phone
Use Speed Dial or Turbo Dial®
Press s. -or-
Press O. -or-
Press A under Yes. -or-
Press any number key.
To answer a call by opening the flip, you must have
the Flip to Ans feature turned on (see “Setting Flip
Actions” on page 83). To answer a call by pressing
any number key, you must have the Any Key Ans
feature turned on (see “Phone Calls Features” on
page 100).
Use One Touch Boost Walkie-Talkie to make a
Boost Walkie-Talkie call
•
Use a TTY device — see “Making TTY Calls” on
page 84
From the Keypad
To enter the number you want to call, press the
numbers on the keypad.
Sending to Voice Mail
If the flip is closed, press .. -or-
Press e. -or-
If you make a mistake:
Press A under No.
•
To clear a digit, press A under Delete.
22
Ways to Enter a Number
•
•
To clear all digits, press and hold A under Delete.
From Contacts
To insert or delete a digit anywhere in the string of
digits you have entered, scroll left or right.
If you have numbers stored in Contacts, you can
use these numbers to make calls. For information on
entering numbers into Contacts, see “Creating
Entries” on page 36.
•
To cancel, press e.
From the Recent Calls List
The recent calls list stores the last 20 calls you
made or received.
1 From the main menu, select Contacts.
2 Scroll to the name or number you want to call.
Tip: To find Contacts entries faster, use the
To select a number from the recent calls list as the
number you want to call:
keypad to enter the first letter of the name.
3 Place the call now. -or-
With the Flip Open
Scroll left or right to display the Contacts type for
the number you want to call.
1 From the main menu, select Recent Calls.
2 Scroll to the name or number you want to call.
If you are making a Boost Walkie-Talkie call, your
phone places the call to the Private ID stored in the
Contacts entry, even if the Boost Walkie-Talkie icon
is not displayed.
With the Flip Closed
1 Press . to display the most recent call.
2 To view the rest of the recent calls list, press the
volume keys on the side of your phone.
If you are making a phone call:
•
Your phone places the call to the phone number
assigned to the Contacts type displayed.
You can call the number displayed by pressing t.
•
If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
23
Making Calls
•
If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you want
to place the call to.
Using a Voice Name
number you want to call, say the voice name into
your phone to enter the number. See page 36 for
information on voice names.
From Datebook
You can use a voice name to enter a phone number
with the flip open or closed.
If you have numbers stored as part of events in
Datebook, you can use these numbers to make
calls. For information on storing events in Datebook,
see “Datebook” on page 89.
1 Press and hold t until a prompt appears telling
you to say the voice name.
2 Speaking into the microphone, say the voice
name assigned to the number you want to call.
1 From the main menu, select Datebook.
2 Select the day of the event containing the number
Your phone plays the name back to you.
you want to call.
If you are making a phone call, the call is placed
automatically.
3 Highlight or select the event containing the
number you want to call.
Tip: To stop a phone call from being completed,
For details, see “Making Calls From Datebook” on
page 93.
press . if the flip is closed or press e.
If you are making a Boost Walkie-Talkie call, press
and hold the Boost Walkie-Talkie Button to place the
call.
Redialing the Last Number
Press and hold s to place a call to the last phone
number you called.
Using Speed Dial and Turbo Dial®
Each phone number stored in Contacts is assigned
a Speed Dial number which you can use to call that
number.
24
Missed Phone Calls
Speed Dial
If you want to view the missed call on the recent
calls list, press A under View.
1 From the idle screen, use the keypad to enter the
Speed Dial number assigned to the phone
number you want to call.
2 Press #.
3 Press s.
With the Flip Closed
If you want to dismiss the missed call message,
press ..
calls list, press . twice.
Turbo Dial
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.
Using Speakerphone
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
Using One Touch Boost Walkie-Talkie
One Touch Boost Walkie-Talkie sets your phone to
call the most recent Private ID number on the recent
calls list, or a Private ID number you choose, every
time you press the Boost Walkie-Talkie Button. See
“Setting One Touch Boost Walkie-Talkie” on page
82.
With the Flip Open
To turn speakerphone on or off:
Press A under Spkr. -or-
Press t.
Missed Phone Calls
With the Flip Closed
When you make a call with the flip closed,
speakerphone is always on.
When you miss a call, this icon V and the number
of phone calls you have missed appear briefly.
Opening the flip turns speakerphone off.
With the Flip Open
If you want to dismiss the missed call message,
press A under Back. -or-
25
Making Calls
response center has the equipment to process
location information. See “GPS Enabled” on page
67, and particularly “IMPORTANT: Things to Keep
in Mind” on page 67 and “Making an Emergency
Call” on page 68, for more information on the
limitations of this feature. Because of the limitations
of this feature, always provide your best knowledge
of your location to the emergency response center
when you make a emergency call.
Using Mute
Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
To turn mute on:
Press A under Mute.
While mute is on, Unmute appears as a display
option.
Important: Emergency calls cannot be placed while
the keypad is locked.
To turn mute off:
Important: If you have not registered on the
network, emergency calls cannot be
Press A under Unmute.
placed while your SIM is in your phone.
Making Emergency Phone
Calls
Your phone supports emergency calling.
Emergency phone calls can be made even when
your SIM is blocked or not in your phone.
Important: If you are bringing your phone number to
Boost Mobile from your previous carrier,
the 911 emergency response center will
not be able to make a callback to your
temporary Boost Mobile phone number
after the phone number you requested
has been activated on your Boost Mobile
phone.
Dial 911 to be connected to an emergency response
center. If you are on an active call, you must end it
before calling 911.
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phone's GPS antenna has established a clear
view of the open sky and your local emergency
26
Receiving Call Alerts
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls or
Boost Walkie-Talkie calls until you do.
Call Alerts
Sending a call alert lets the recipient know you want
to talk to him or her on a Boost Walkie-Talkie call.
When you send a call alert, the recipient’s phone
emits a series of beeps and displays your name or
Boost Walkie-Talkie number.
To answer a call alert:
Press the Boost Walkie-Talkie Button to make a
Boost Walkie-Talkie call to the sender.
The recipient can:
To queue a call alert:
Press A under Queue.
To clear a call alert:
•
•
•
Answer — begin a Boost Walkie-Talkie call with
the sender
Queue — store the call alert to the call alert
queue, which is a list of call alerts
Press O. -or-
Clear — dismiss and delete the call alert
Press A under Clear. -or-
If the flip is closed, press ..
Sending Call Alerts
1 Enter the Boost Walkie-Talkie number you want to
send to, as you would when making a Boost
Walkie-Talkie call.
2 Press A under Alert. Ready to Alert appears on
the display.
Note: The recent calls list also stores call alerts
you have received. They appear as Boost
Walkie-Talkie calls. Call alerts remain in
your recent calls list until you delete them
or until they reach the end of the list.
3 Press the Boost Walkie-Talkie Button until Alert
Successful appears on the display.
Using the Call Alert Queue
Note: If the alert is not successful, this may mean
the person you are trying to reach is on a
call or has the phone turned off.
When you queue a call alert, it remains in the call
alert queue until you make a Boost Walkie-Talkie
call to the sender or delete it.
27
Call Alerts
4 Press the Boost Walkie-Talkie Button until Alert
Successful appears on the display.
Viewing Call Alerts
1 From the main menu, select Call Alert.
2 Scroll through the list.
Deleting Call Alerts
To delete a call alert from the queue:
Viewing Date and Time
To view the date and time a call alert was received:
1 From the call alert queue, scroll to the call alert
you want to delete.
2 Press m.
3 Select Delete.
1 From the main menu, select Call Alert.
2 Select the call alert you want information on.
4 Press O or press A under Yes to confirm.
Responding to Call Alerts in the Queue
After you queue a call alert, you can respond to it by
making a Boost Walkie-Talkie call to the sender or
sending a call alert to the sender.
To delete all call alerts from the queue:
1 From the call alert queue, press m.
2 From the call alert menu, select Delete All.
3 Press O or press A under Yes to confirm.
Making a Boost Walkie-Talkie Call to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press the Boost Walkie-Talkie Button to begin the
call.
Sorting Call Alerts
Tip: You must have at least one call alert in the
queue to access this feature.
To sort call alerts by the order they were received:
This removes the call alert from the queue.
1 From the main menu, select Call Alert.
2 Press m.
3 Select Sort By.
Sending a Call Alert to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press A under Alert. Ready to Alert appears on
the display.
4 Select First on Top or Last on Top.
28
Viewing Recent Calls
With the Flip Open
Recent Calls
The recent calls list stores the numbers of the 20
most recent calls you have made and received.
1 From the main menu, select Recent Calls.
2 Scroll through the list.
If the number of a recent call is stored in Contacts,
the name associated with the number appears on
the recent calls list.
To get more information on a recent call:
From the recent calls list, select the call you want
information on.
An icon appears beside the name or number
indicating the Contacts type of the number used in
the call. See “Contacts” on page 35.
This displays information such as the name
associated with the call, the number, the date, time,
and duration of the call.
For phone calls, an icon appears to the left of the
name or number giving more information about the
call:
With the Flip Closed
1 Press . to display the most recent call.
A call you made.
2 To view the rest the recent call list, press the
X
volume keys on the side of your phone.
A call you received.
W
3 Press . to dismiss the recent calls list.
A missed call. Missed calls appear on the
recent calls list only if you have Caller ID.
Tip: Press t to call the number displayed.
V
Storing Recent Calls to
Contacts
1 From the recent calls list, scroll to the number you
want to store.
Note: The recent calls list also stores call alerts
you have received. They appear as Boost
Walkie-Talkie calls. Call alerts remain in
your recent calls list until you delete them
or until they reach the end of the list.
29
Recent Calls
2 Press A under Store. -or-
3 Press O or press A under Yes to confirm.
If Store is not one of your options: Press m.
To delete all calls:
Select Store.
1 From the recent calls list, press m.
2 Select Delete All.
3 Press O or press A under Yes to confirm.
Tip: If Store is not on this menu, the number is
already stored in Contacts.
3 To store the number as a new entry, select [New
Contact]. -or-
To store the number to an existing entry, select
the entry.
4 With the Contacts type field highlighted, scroll left
or right to display the Contacts type you want to
assign the number. For information on Contacts
types, see page 35.
5 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 36.
6 Press A under Done.
Deleting Recent Calls
To delete a call:
1 From the recent calls list, scroll to the call you
want to delete.
2 Press A under Delete. -or-
If Delete is not one of your options: Press m.
Select Delete.
30
2 Select the text input mode you want to use. A
checkmark appears next to the current mode.
Entering Text
You can enter text into your phone using the
traditional method of pressing a key several times
for each character, or by pressing a key once for
each letter while words likely to be the one you want
are chosen from a database. You can also enter
symbols and numbers into a text field.
Using Alpha Mode
•
•
•
Press any key on the keypad to enter the letters,
numbers, and symbols on that key. For example,
to enter the letter Y, press 9 three times.
Type a letter then scroll up to make that letter
uppercase, or type a letter then scroll down to
make that letter lowercase.
In screens that require you to enter text, you see the
following icons. These icons tell you which text input
mode you are using:
See “Special Function Keys” on page 32 for more
information on adding spaces, capitalization, and
punctuation.
Alpha — Press a key several times for each
l
j
character.
Word — Press a key once for each letter while
words likely to be the one you want are chosen
from a database.
Using Word Mode
In Word mode, T9 Text Input analyzes the letters on
the keypad button you press and arranges them to
create words. As you type, T9 Text Input matches
your keystrokes to words in its database and
displays the most commonly used matching word.
You can add you own words to this database.
Symbols — Enter punctuation and other
i
k
symbols.
Numeric — Enter numbers.
When you access a screen that requires you to
enter text, you start in the mode last used.
Entering a Word
1 Select Word as your text input mode.
2 Type a word by pressing one key for each letter.
To choose a text input mode:
1 At a screen that requires you to enter text, press
m.
For example, to type “test” press 8 3 7 8.
31
Entering Text
The displayed word may change as you type it.
Do not try to correct the word as you go. Type to
the end of the word before editing.
3 Select the language you want for your database.
Special Function Keys
Some of the phone’s keys assume different
functions while in Alpha or Word mode.
3 If the word that appears is not the desired word,
press 0 to change the word on the display to
the next most likely word in the database.
Spaces
Repeat until the desired word appears.
Press # for a space.
If the desired word does not appear, you can add it
to the database.
Capitalization
Adding Words to the Database
Press and hold # to make the next letter typed
uppercase (shift), to make all subsequent letters
typed uppercase (caps lock), or to go back to
lowercase letters.
1 Select Alpha as your text input mode.
2 Type the word using Alpha mode.
3 Select Word as your text input mode.
4 Press #.
These icons appear in the top row of your display:
The word you typed in Alpha text entry mode is now
in the database.
Shift is on.
m
or
Note: You cannot store alphanumeric
Caps lock is on.
combinations, such as Y2K.
n
or
Choosing a Language
When neither of these icons appear, letters typed
are lowercase. Scrolling up after typing a letter
makes that letter uppercase.
To change the language of the database:
1 At a screen that requires you to enter text, press
m.
2 Select Languages.
Note: Your phone automatically makes the first
letter of a sentence uppercase.
32
Using Numeric Mode
Punctuation
Press 1 or 0 to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select the symbol you
want.
Note: Additional punctuation symbols are
available in Symbols mode.
Using Numeric Mode
1 Select Numeric as your text input mode.
2 Press the number buttons on your keypad to
enter numbers.
Using Symbols Mode
1 Select Symbols as your text input mode.
A row of symbols appears along the bottom of the
phone’s display. Scroll right to view the complete
row.
2 Press O to select the highlighted symbol.
33
34
•
A Contacts type — Each number or address
stored must be assigned a Contacts type:
Contacts
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
Mobile
DC
phone number
Boost Walkie-Talkie number
phone number
phone number
phone number
email address
A
B
Information stored in Contacts is saved on your SIM.
A Contacts entry contains:
Work1
Work2
Home
Email
Fax
C
D
E
F
G
H
J
K
•
A name — A name is required if your are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the name
of the person whose contact information is stored
in the entry.
•
A ring tone — You can assign a ring tone to each
entry. This is the sound your phone makes when
you receive phone calls or call alerts from any of
the numbers stored in the entry.
phone number
phone number
IP address
Pager
IP
Other
phone number
•
A number or address — Each Contacts entry
must contain a number or address. This may be
any type of phone number, Boost Walkie-Talkie
number, email address, or IP address.
35
Contacts
Note: You can store numbers up to 64 digits long,
4 Scroll to view the other numbers and addresses
but every 20 digits must be separated by a
pause or wait. See “Creating Pauses and
Waits” on page 39.
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
•
•
A Speed Dial number — When you store a phone
number, it is assigned a Speed Dial number. You
can accept the default Speed Dial number or
change it.
1 From the Contacts list, press A under Search.
-or-
A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon
appears P to the left of the Contacts type icon if
a voice name is assigned.
If Search is not one of your options: Press m.
Select Search.
2 Enter the name you want to see. See “Entering
Text” on page 31.
3 Press O.
Viewing Contacts
To access Contacts:
Your phone finds the name you entered or the
nearest match.
From the main menu, select Contacts. -or-
If you are on a call: Press m. Select Contacts.
To view entries:
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information is
optional. You may enter the information in any order
by scrolling through the entry details.
1 From the Contacts list, scroll to the entry you want
to view.
2 If an entry has more than one number or address
stored, <> surrounds the Contacts type icon.
Scroll left or right to view the icon for each number
stored in the entry.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Done to save the entry to
Contacts.
3 Press O to view the entry.
36
Creating Entries
To cancel a Contacts entry at any time press, e to
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 31.
return to the idle screen.
To create a Contacts entry:
Tip: Press A under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
1 To access the entry details screen:
Select Contacts > [New Contact]. -or-
From the Contacts list, press m. Select New.
2 If you want to assign a name to the entry:
Select Name.
When you are finished, press O.
6 If you want to assign more options to the number,
select [Options]. See “Assigning Options” on
page 37.
7 If you want to add more numbers or addresses to
the entry:
Enter the name. See “Entering Text” on page 31.
When you are finished, press O.
Tip: Press A under Browse to select a name
Scroll past the information you already entered.
already in Contacts.
Enter the additional information for the entry using
step 2 through step 6. You must assign a name to
the entry, if you have not already.
3 If you want to assign a ring tone to the name:
Select Ringer.
8 Press A under Done.
Select the ring tone you want to assign.
4 To assign a Contacts type to the number or
Assigning Options
1 If you have not already, select [Options].
2 The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5 To store a number or address:
Select the # field (or ID for an email address, or IP
for an IP address).
If you want to assign the phone number to a
different Speed Dial location:
37
Contacts
With the Speed # field highlighted, press O.
4 To store the number as a new entry, select [New
Contact]. -or-
Press and hold A under Delete to delete the
current Speed Dial number.
To store the number to an existing entry, select
the entry.
Enter the new Speed Dial number using the
keypad.
5 With the Contacts type field highlighted, scroll left
or right to display the Contacts type you want to
assign the number.
follow the applicable instructions in “Creating
Entries” on page 36.
When you are finished, press O.
3 If you want to create a voice name for a phone
number, select Voice Name.
As directed by the screen prompts, say and
repeat the name you want to assign to the
number. Speak clearly into the microphone.
7 Press A under Done.
Editing Entries
4 When you are finished, press A under Back.
1 From the Contacts list, scroll to the entry you want
Storing Numbers Faster
To store numbers to Contacts from the recent calls
list, see “Storing Recent Calls to Contacts” on page
29.
to edit.
2 Press A under Edit. -or-
If Edit is not one of your options: Press m. Select
Edit.
To store numbers to Contacts from Memo, see
“Memo” on page 41.
The entry details screen displays.
3 Follow the applicable instructions in “Creating
Entries” on page 36 to edit the various fields.
To store numbers to Contacts from the idle screen:
1 Use the keypad to enter the number you want to
store.
2 Press m.
3 Select Store Number.
38
Deleting Entries
2 Select Capacity.
Deleting Entries
Creating Pauses and Waits
Delete an Entry
1 From the Contacts list, scroll to the entry you want
When storing a number, you can program your
phone to pause or wait between digits while dialing.
A pause makes your phone pause for 3 seconds
before dialing further. A wait makes your phone wait
for your response before dialing further.
to delete.
2 Press m.
3 To delete the entire entry, select Delete Contact.
4 Press O or press A under Yes to confirm.
This feature is useful when using voice mail or other
automated phone systems that require you to dial a
phone number and then enter an access number.
Delete a Number or Address
1 From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2 Scroll left or right to display the Contacts type for
the number you want to delete.
3 Press m.
4 Select Delete Number.
5 Press O or press A under Yes to confirm.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
To program a wait:
Checking Capacity
To see how many numbers are stored in Contacts:
Press and hold * until the letter W appears. The
W means your phone waits before dialing further.
1 From the Contacts list, press m.
39
Contacts
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
“Creating Pauses and Waits While Dialing”
on page 81.
International Numbers
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
For information about making international calls, see
“Making International Calls” on page 82.
40
2 Press m.
3 Select Store to Cntcts.
4 To store the number as a new entry, select [New
Contact]. -or-
Memo
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
To store the number to an existing entry, select
the entry.
1 From the main menu, select Memo.
2 Enter the number using your keypad.
3 Press O.
5 With the Contacts type field highlighted, scroll left
or right to display the Contacts type you want to
assign the number.
6 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 36.
To view the memo later:
1 From the main menu, select Memo.
To delete the memo:
7 Press A under Done.
1 From the main menu, select Memo.
2 Press and hold A under Delete.
To edit the memo:
1 From the main menu, select Memo.
2 Enter the new number.
3 Press O.
To make a call to the memo number:
1 From the main menu, select Memo.
2 Press s.
To store the memo number to Contacts:
1 From the main menu, select Memo.
41
42
•
To access your personal options, press 4.
Boost Mobile Voice Mail
If you press * while you are in a sub-menu, you
will go to the previous menu. If you press **,
you will go to the main voice mail menu. From the
main voice mail menu, press # to exit voice mail.
At any time, you may end the call by pressing e.
Note: To receive voice mail messages, you must
first set up your voice mail box.
Setting Up Your Voice Mail Box
Using your i730 phone, dial your 10-digit Boost
Mobile Personal Telephone Number (PTN). For
example: 7035557777. Follow the system
instructions to create a new 4- to 7-digit password,
record your name, and record a greeting. When the
system says, “Thank you for using Boost Mobile
Voice Mail,” your mail box is set up.
Playing Messages
When you receive a new voice mail message, you
can either listen to it immediately by pressing A
under Call, or later by pressing A under Exit.
These are options available while you are listening
to your messages:
If you are calling from a phone other than your i730,
dial your 10-digit Boost Mobile PTN. When you hear
the greeting, press the star key to access your voice
mail box. The system will prompt you to enter your
password. Enter the last seven digits of your Boost
Mobile PTN. For example: 5557777. This is your
temporary password.
•
•
•
Backup — press 1.
Rewind to beginning of message — press 11.
Pause or continue the current message — press
2.
•
•
•
Fast forward — press 3.
Fast forward to end of message — press 33.
Play the date and time stamp — press 55.
You are in the main voice mail menu when you hear
the options listed below.
•
To play your messages, press 1. (This option
plays only if you have new or saved messages.)
These options are available while a message is
playing or after it has played:
•
•
To record a message, press 2.
•
Forward the message to another subscriber —
press 6.
To change your greeting, press 3.
•
Delete the message — press 7.
43
Boost Mobile Voice Mail
•
•
•
Reply to a message — press 8.
Save the message — press 9.
Skip to the next message — press #.
5 Press ** to return to the main menu.
Note: If you forget your password, contact
Customer Care.
Messages that are not saved or deleted remain in
your mail box as new messages. All messages are
automatically deleted after 21 days.
Recording Your Name
When you send, reply to, or copy a message, your
name response precedes the message. To record
or re-record your name at any time:
To retrieve deleted messages, press * 3. This
option only applies to the current voice mail session.
If you end the call, the messages will be
permanently deleted.
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 4 to access personal preferences.
3 Press 3 to access the record your name option.
4 Press 2 to record your name.
Important: After exiting the voice mail session, you
cannot recover deleted messages.
Changing Your Password
5 Press ** to return to the main menu.
1 From the main voice mail menu, press 4 to
access personal options.
Recording Your Active Greeting
2 Press 4 to access personal preferences.
3 Press 1 to modify password.
4 Enter your new password. It must be 4 to 7 digits
long.
You may want to include one or all of the following
options in your greeting so that callers will know they
are available.
•
•
Press 1 to send a numeric message.
Note: It is important that you choose a number
that is easy for you to remember, but hard
for someone else to guess. Passwords
using all the same digits, for example
4,4,4,4 or a sequential series of digits,
1,2,3,4, will not be accepted.
Press 2 to send an operator-assisted message.
(This option is available only if you are a
subscriber of Operator Assisted Messaging.
Contact Boost Mobile Customer Care for more
information.)
44
Advanced Voice Mail Features
4 Press 2 to record a greeting.
5 Record your greeting and press # when you
have finished.
•
Press # to skip the greeting and record a
message immediately.
To record or alter your greeting at any time:
6 Press ** to return to the main menu.
1 From the main voice mail menu, press 3 to
change your greeting.
To select your active greeting:
2 Press 1 to play, press 2 to record or
re-record, or press 7 to delete your active
greeting.
3 Record your greeting and press # when you
have finished.
4 Press ** to return to the main menu.
Advanced Voice Mail Features
Multiple Greetings
1 From the main voice mail menu, press 3 to
access the greetings menu.
2 Press 3 to select another greeting to be active.
3 Enter the number of the greeting that you would
like to be active. The system will confirm your
active greeting number.
4 Press 1 to play your active greeting.
5 Press ** to return to the main menu.
Greetings Schedule
You can choose to have your greetings
You can create up to five different greetings and
designate which greeting will be your active greeting
at any given time. The greeting that was recorded
during your initial voice mail box setup is greeting 1.
This is your default active greeting.
automatically activated based on a pre-determined
time schedule. By activating the Greeting Schedule,
Greetings 1, 2, and 3 will automatically play
according to the time schedule listed below.
To record additional greetings:
Greeting 1 Evenings and 5:00 pm – 7:59 am,
1 From the main voice mail menu, press 3 to
access the greetings menu.
2 Press 4 to modify greetings.
Weekends
Monday – Friday
24-hours, Saturday
and Sunday
3 Enter the greeting number you wish to create or
modify.
45
Boost Mobile Voice Mail
5 Press ** to return to the main menu.
Greeting 2 Weekday
Mornings
8:00 am – 11:59 am
Monday – Friday
Changing the Playback Order of Messages
Greeting 3 Weekday
Afternoons
Noon – 4:59 pm
Monday – Friday
You can select the order in which you want unheard
messages to be played. You may listen to the last
received message first, or you may listen to the first
received message first. To select the order in which
new messages should be played:
To activate the greeting schedule:
1 From the main voice mail menu, press 3 to
access the greetings menu.
2 Press 9 to activate your greeting schedule.
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 4 to access personal preferences.
3 Press 2 to access playback preferences.
4 Press 1 to switch between the playback orders.
5 Press ** to return to the main menu.
3 Press ** to return to the main menu.
Note: The greeting schedule, when on, will
override any other greeting that you may
set as active. If a greeting is not recorded, a
system standard greeting will be played.
Recording, Forwarding, and Replying to
Messages
Automatic Playback
These functions allow you to record and send, reply
to, or forward a message to an assigned destination
address list number. If you record a complete or
partial message, but do not send it, Boost Mobile
Voice Mail service will refer to this message as an
“in preparation” message.
By default, the playback mode of your voice mail
service is set to normal. This feature automatically
plays and saves new messages when you log in. To
activate automatic playback:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 4 to access personal preferences.
3 Press 2 to access playback preferences.
4 Press 2 to switch between automatic and
normal playback.
To record and send a message:
1 From the main voice mail menu, press 2 to
record a message.
46
Advanced Voice Mail Features
2 Record your message and press # to end the
•
•
Notification of Non-Delivery — You will be
notified if the recipient has not listened to your
message by a certain date and time.
message.
3 Press 9 at the prompt to indicate that you want
to send the message or press 5 for delivery
options.
4 Enter the mail box number list number(s). (A mail
box number is the 10-digit Boost MobileTM PTN of
a Boost Mobile customer. The Boost Mobile
customer must be in your local calling area. The
name of the recipient plays if it is recorded.)
Future Delivery — You can specify a time and
date (up to three months in advance) for the
message to be delivered.
Note: All dates must have digits in the MM/DD
format (2 digits for the month and 2 digits
for the date). For example, January 2nd
would be 0102.
5 Press # to send.
6 Press ** to return to the main menu.
Important: Once a message has been sent for future
delivery, it cannot be retrieved or deleted.
Note: You can only send messages using this
method to Boost Mobile customers in your
home market.
To set a special delivery option:
1 After recording your message, but before sending
it, press 5 for delivery options.
Delivery Options
2 Press the number that corresponds with the
desired delivery option:
After you have created a message, you can assign
the message to a category before you send it. Below
is a list of the options that can be applied to a
message:
•
•
•
Press 1 for urgent.
Press 2 for private.
Press 3 for notification of non-delivery. At
prompt, specify time and date.
•
Urgent — Recipient will hear this message
before other messages.
•
•
Press 4 for future delivery of messages. At
prompt, specify time and date.
•
Boost Walkie-Talkie — Recipient cannot copy
the message to another mail box or phone
number.
Press 9 to send the message immediately.
47
Boost Mobile Voice Mail
3 The list of options will be presented again. Select
an additional option or press 9 to send the
message.
4 Enter the destination mail box list number of the
recipient(s).
5 Press # to send.
6 Press ** to return to the main menu.
7 Press # to save all entries added to the list.
8 Press ** to return to the main menu.
To modify a group list:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 2 to access group lists.
3 Press 4 to modify a group list. Enter the number
of the group list you want to modify.
Working With Group Lists
4 Press 1 to add a new recipient.
5 Press # to save your changes.
6 Press ** to return to the main menu.
This feature enables you to create a list and assign it
a unique name. Then, you can add mail box
numbers, group lists, or individuals. Once you
create a list you can send a voice message to
everyone on the list by entering the group list
number. You can have up to 40 group lists. Each list
can hold up to 50 addresses.
Deleting a group list:
1 From the main voice mail menu, press 4 to
access personal options.
To set up a group list:
2 Press 2 to access group lists.
3 Press 3 to delete a group list.
1 From the main voice mail menu, press 4 to
access personal options.
4 Enter the number of the group list you want to
delete. The system will play the name of the
group list.
5 Press # to delete the list.
6 Press ** to return to the main menu.
2 Press 2 to access your Group Lists.
3 Press 2 to create a Group List.
4 Enter the 1- or 2-digit group list number and press
#.
5 Record a name for the list and press #.
6 Select group members by mail box number, group
list, or name.
48
Advanced Voice Mail Features
Message Forwarding
Note: You can only forward messages to Boost
Mobile customers in your home market.
This feature allows you to program your phone to
automatically forward incoming messages to
another mail box. There are two types of forwarding:
notified and silent. Notified forwarding prompts the
caller that the message will be forwarded. Silent
forwarding does not prompt the caller that the
message will be forwarded.
To modify forwarding options:
1 From the main voice mail menu, press 4 to
access personal options.
2 Press 5 to modify forwarding options.
3 Select the applicable option below:
•
•
To create a forwarding number, press 2.
If you have already created a forwarding
number, press 2 to modify the number.
•
•
To enable or disable message forwarding,
press 3.
To change the forwarding type, press 2.
4 Press ** to return to the main menu.
49
50
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message or
dismiss the alert.
Messages
To access your voice mail messages, text and
numeric messages, Web alerts, and any other types
of messages you are able to receive, go to the
message center:
If you are on a call when you receive a message,
your phone may sound a notification tone during the
call or after you end the call, depending on how you
set your notification options.
1 From the main menu, select Messages.
2 Select the type of message you want to access.
Setting Notification Options
To control whether your phone sounds message
notification tones while you are on phone calls:
The message center shows how many messages
you have of each type. You can listen to, read, or
delete these messages.
Note: In order for you to access voice mail
through the message center, there must
already be a message in your voice mail
box. If there is no message, you must
access voice mail by dialing into your voice
mail box using your PTN.
1 From the main menu, select Settings > Phone
Calls > Notifications.
2 Select the option you want:
•
Receive All — Tones sound during calls for all
types of messages.
•
Msg Mail Only — Tones sound during calls for
mail messages; tones for all other types of
messages are held until you end calls.
Message Notifications
When you receive a message, your phone notifies
you with text on the display and a notification tone or
vibration. You can access the message or dismiss
the notification.
Note: Delay All is the default setting.
•
Delay All — Tones for all types of messages
are held until you end calls.
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
Tip: To set notification options during a call: Press
m. Select In Call Setup > Notifications.
51
Messages
Voice Mail
When you receive a voice mail message, New
Voice Mail Message appears on the display.
Boost MobileTM Text and
Numeric Messages
Your i730 refers to Text Messages as Web Alerts.
With Boost MobileTM Text Messaging, you can:
Press A under Call.
To dismiss the message notification:
If the flip is closed, press .. -or-
•
•
•
Send and receive messages (up to 500
characters in length) with preset replies and
respond to them at the touch of a button.
If the flip is open, press O or press A under
Back, or close the flip.
Send messages to one individual from your
phone or contact several at once from any email
system or boostmobile.com.
Respond to messages when you’re at a movie or
in a noisy location.
This icon yappears on the display, reminding
you that you have a new message.
Sending Unanswered Calls to Voice
Mail
To send a phone call to voice mail instead of
answering it:
For additional information on how to use this
service, visit www.boostmobile.com.
Sending a Text Message
Boost Mobile Text Messaging provides 2 choices for
sending messages: Web Messaging or Email
Messaging.
If the flip is closed, press .. -or-
Press e. -or-
Press A under No.
Web Messaging on BoostMobile.com
If the caller leaves a message, this icon yappears
on the display, reminding you that you have a new
message.
Boost MobileTM Web Messaging enables you to
send a message to yourself, someone else, or a
group of Boost Mobile customers.
52
Boost MobileTM Text and Numeric Messages
For more information or to send a Web message, go
If your phone is powered off when you receive a
message, your phone notifies you the next time you
power it on. If you are out of your coverage area,
your phone alerts you when you return to your
coverage area.
to boostmobile.com and click on Send a Message.
Email Messaging
From any email account, type the 10-digit phone
number of a Boost Mobile customer in the To field
and add @myboostmobile.com (for example,
[email protected]). The entire
message can be up to 500 characters.
Your phone attempts to deliver these messages for
up to 7 days.
Tip: While reading a text and numeric message
that contains a phone number, you can press
s to call that number.
Sending a Numeric Message
Boost MobileTM Numeric messaging is available
through Boost Mobile Voice Mail. These messages
can be displayed directly on your i730. To leave a
numeric message:
Receiving a Message
When you receive a text and numeric message, this
icon wappears on the display.
•
The caller must press “1” during your Voice Mail
greeting.
To view the message:
1 Press A under Read.
2 If the message fills more than one screen, scroll
to read it.
•
Once the caller presses “1” only numeric
messages can be sent.
The phone’s display refers to text and numeric
messages as Text Messages.
3 To keep the message, press O. -or-
To delete the message, scroll to the end of the
message, then press A under Delete.
These messages can be up to 140 letters or 20
digits long. You can store up to 16 of these
messages. Each message is stamped with the date
and time it was left.
To dismiss the message notification:
If the flip is closed, press .. -or-
If the flip is open, press A under Back or close
the flip.
53
Messages
This icon wappears on the display, reminding
If you dismiss the notification, this icon Tappears
on the display, reminding you that you have a new
message.
you that you have a new message.
Reading from the Message Center
1 From the main menu, select Messages > Text
Msgs.
When you delete a Web alert, the message is not
deleted, but it is no longer accessible through the
message center. You can still access the message
through Boost Mobile Online services.
2 Select the message you want to read.
3 If the message fills more than one screen, scroll
to read it.
4 To keep the message, press O. -or-
To delete the message, scroll to the end of the
message, then press A under Delete.
Web Alerts
Web alerts are notifications that you have a text and
numeric messages sent from:
•
•
•
Your i730 phone
www.boostmobile.com
Any email application
Note: Your phone's SMS address is your
[email protected]. Example:
phone's Text Messaging address is your
When you receive a Web alert, a notification
appears on the display.
54
Enter the number using your keypad. -or-
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one number
or forward missed calls to different numbers
depending on the reason you missed the call.
Press A under Search. Select Contacts, Recent
Calls, or Memo. Select the number you want to
enter.
4 Press O.
All your calls are now forwarded to the number you
specified.
Forwarding All Calls
When you set your phone to forward all calls, an
icon appears in the top row of the display:
Turning Off Call Forwarding
If you don’t want all your calls forwarded, turn the
feature off:
Phone line 1 is active; calls to phone line 1 are
being forwarded.
G
1 From the main menu, select Call Forward > To.
2 Set this option to Off.
To forward all calls:
All your calls are now sent to your phone.
1 From the main menu, select Call Forward >
Forward > All Calls.
2 Select To.
Calls you miss are forwarded according to the
options set for missed calls. By default, missed calls
are forwarded to voice mail.
If you specified a forwarding number for all calls
before, this number displays.
Forwarding Missed Calls
You can specify a forwarding number for each type
of missed call:
To forward calls to this number, press A under
Back.
To delete this number, press O, then press and
hold A under Delete.
•
If Busy — Your phone is on a call or transferring
data.
3 To enter the number you want to forward calls to:
55
Call Forwarding
•
•
If No Answer — You do not answer on the first 4
Viewing Call Forwarding
Settings
1 From the main menu, select Call Forward >
Forward > All Calls.
rings.
If Unreachable — Your phone is out of coverage
or powered off.
To forward missed calls:
2 With To highlighted, press A under Status.
1 From the main menu, select Call Forward >
Forward > Detailed.
2 Select If Busy to specify a forwarding number for
calls received when your phone is busy.
3 If you specified a forwarding number for this type
of call before, this number displays.
To forward calls to this number, press A under
Back and go to step 6. -or-
To delete this number, press O, then press and
hold A under Delete.
4 To enter the number you want to forward this type
of call to:
Enter the number using your keypad. -or-
Press A under Search. Select Contacts, Recent
Calls, or Memo. Select the number you want to
enter.
5 Press O.
6 Repeat step 2 through step 5 for No Answer and
If Unreachable.
7 When you are finished, press A under Back.
56
Tip: If you don’t hear the sounds associated with
the Java application, select Settings >
Volume and check the volumes of Java
Speaker and Java Earpiece.
Java® Applications
Your phone arrives with Java applications installed
and ready to run. You can download and install
more Java applications.
Suspending Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can
run another application in the foreground.
To download and install more Java applications, go
to www.boostLIVE.COM.
Note: Using Java applications may cause your
phone to use up more battery power than
other uses of your phone.
To suspend an application:
Press e or close the flip.
Running Applications
To run an application that has a shortcut on the main
menu:
To view your suspended applications:
From the Java menu, select Suspended Apps.
You can have up to 3 applications running at one
time — 1 running in the foreground and 2 in the
background.
1 From the main menu, select the application or
suite of applications you want to run.
2 If you have selected a suite of applications, select
the application you want to run.
Resuming Applications
You can resume a suspended application at any
time. This brings it to the foreground.
To run an application that does not have a shortcut
on the main menu:
1 From the main menu, select Java Apps.
2 Select the application or suite of applications you
want to run.
1 From the Java menu, select Suspended Apps.
2 Select the application you want to resume.
3 If you have selected a suite of applications, select
the application you want to run.
57
Java® Applications
Ending Applications
To end an application:
Installing Applications
Before running most application you have
downloaded, you must install them.
1 From the main menu, select Java Apps.
2 If the application you want to end is part of a suite
of applications, select the suite.
1 From the main menu, select Java Apps.
2 Select the application or suite of applications you
want to install.
3 Scroll to the application you want to end.
3 If you want to create a shortcut to the Java
application on the main menu: Press A under
Next. Press A under Yes.
4 Press A under End.
To end all applications:
1 From the main menu, select Java Apps.
2 Scroll to Suspended Apps.
3 Press m.
4 Select End All.
5 If you want to end all applications without letting
them exit, press A under EndNow.
4 Press O.
5 Press A under Done.
Deleting Applications
To delete an application:
1 From the main menu, select Java Apps.
2 Scroll to the application you want to delete.
3 Press m.
Tip: You can also end applications from the
Suspended Apps screen.
4 Select Deinstall.
5 Press O or press A under Yes to confirm.
6 When your phone has finished deleting the
application, press A under Done.
Downloading Applications
If you want to run more Java applications, you can
download them into your phone. Go to
www.boostmobile.com for a selection of Java
applications and downloading instructions.
To delete all Java applications:
1 From the main menu, select Java Apps.
2 Scroll to Java System.
58
Managing Memory
3 Press m.
4 Select Delete All.
To create a shortcut to an application that is already
installed:
5 Press O or press A under Yes to confirm.
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -or-
Managing Memory
To view the amount of memory available for Java
applications:
From the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to create a
shortcut for.
4 Press O.
5 Press A under Done.
1 From the main menu, select Java Apps > Java
System.
2 Press A under Next.
3 To see more memory information, press A under
Next again.
Deleting Java applications frees memory.
Note: Java application data is stored in your
phone using the same memory space used
to store voice records, ring tones, and
wallpaper images. Deleting some of these
other items frees memory space for Java
applications.
To remove a shortcut:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -or-
From the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
Shortcuts on the Main Menu
When you install an application, you can create a
shortcut to the application on the main menu.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to remove the
shortcut for.
59
Java® Applications
4 Press O.
5 Press A under Done.
•
By Permission — When a Java application
attempts to access the location of your phone,
you are prompted to give permission. However,
location information may still be available to the
administrator.
Java Applications and GPS
Enabled
See “Setting Privacy Options” on page 72 for
information on choosing these options.
Some Java applications can make use of your
phone’s GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 67 for more information on the
GPS feature.) However, for privacy reasons, you
may not always want Java applications to access
the location of your phone. Your phone protects your
privacy by giving you the option to block all or some
Java applications from accessing the location of
your phone.
Granting or Denying Permission
If you choose By Permission, you must grant or
deny each Java application access to the location of
your phone when the application requests access
for the first time. You may be required to grant or
deny subsequent requests from the same
application, depending on the privacy setting you
choose for the individual Java application (see
“Setting Privacy for Each Java Application” on page
61).
Setting Privacy for All Java
Applications
These options control the privacy of all Java
applications on your phone:
When a Java application requests access the
location of your phone, a screen appears informing
you.
•
Restricted — No Java or similar software
applications may access the location of your
phone. However, location information may still be
available to the phone’s owner, fleet manager, or
account administrator.
To deny this request:
1 Press A under Deny. The application does not
access the location of your phone.
2 Select the denying option you want:
•
Unrestricted — All Java applications may access
the location of your phone, without notifying you.
60
Java Applications and GPS Enabled
•
•
Always — If the application requests access to
the location of your phone again, the request is
denied without notifying you.
For this session — If the application requests
access to the location of your phone again
before you power off your phone, the request is
denied without notifying you.
Setting Privacy for Each Java
Application
After a given Java application requests access to
the location of your phone for the first time, you have
the opportunity to set GPS privacy option for that
Java application.
•
Only Once — If the application requests
access to the location of your phone again, you
are prompted to grant or deny permission.
1 From the main menu, select Java Apps.
2 Select the application or suite of applications you
want to set the privacy option for.
To grant this request:
If the application has requested access to the
location of your phone, m appears when you
highlight the application.
1 Press A under Grant. The application accesses
your phone’s location.
2 Select the granting option you want:
3 Press m.
•
Always — If the application requests access to
the location of your phone again, the request is
granted without notifying you.
For this session — If the application requests
access to the location of your phone again
before you power off your phone, the request is
granted without notifying you.
Only Once — If the application requests
access to the location of your phone again, you
are prompted to grant or deny permission.
4 Select Permissions.
5 Select the privacy option you want for this
application:
•
•
Always — The application always has
permission to access the location of your
phone, without notifying you.
•
Ask — When the application requests access
to the location of your phone, you are prompted
to grant or deny permission (see “Granting or
Denying Permission” on page 60).
•
•
Never — When the application requests
access to the location of your phone, the
request is denied without notifying you.
61
62
2 Set this option to On.
Ring Tones
Tip: Pressing the volume controls to turn down the
To set the ring tone your phone makes when you
receive phone calls, message notifications, or call
alerts:
volume as far as possible sets VibeAll to On.
To set your phone to vibrate instead of making a
sound for some features but not others:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone to
vibrate instead of making a sound; Silent sets your
phone to neither vibrate nor make a sound.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Select Vibrate from the list of ring tones.
4 Select the features you want to set to make no
sound.
5 When you are finished, press A under Done.
Tip: Highlight a ring tone to hear it.
Note: To set ring options for Boost Walkie-Talkie
calls and group calls, see “Setting Your
Phone to Vibrate” on page 97.
4 Select the features you want to assigned the ring
tone to.
Tip: A checkmark next to a feature means the
current ring tone has been assign to it. To
remove the assignment, select the feature.
These icons indicate how the ringer is set.
Q
M
The phone always vibrates instead of ringing.
The phone does not ring for phone calls.
5 When you are finished, press A under Done.
Setting Your Phone to Vibrate
You can set your phone to vibrate instead of making
a sound when you receive all phone calls, Boost
Walkie-Talkie calls, messages notifications, and call
alerts.
Boost Walkie-Talkie calls are heard through
the earpiece, not the speaker.
u
These icons may appear at the same time.
1 From the main menu, select Ring Tones >
VibeAll.
63
Ring Tones
7 When you are finished, press A under Done.
Assigning Ring Tones to
Contacts
This icon Sappears on the display.
You can set the ring tone your phone makes when
you receive phone calls or call alerts from someone
you have stored in Contacts.
Viewing Ring Tone
Assignments
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Highlight any ring tone.
4 Press m.
5 Select Overview.
6 Scroll to view ring tones assigned to features and
Contact entries.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign.
4 Select A Contact.
5 Select the Contacts entry you want to assign the
ring tone to.
Ring and Vibrate
To set a your phone to ring and vibrate when you
receive phone calls or call alerts:
Downloading More Ring Tones
If you want to use other ring tones, you can download
them into your phone for a fee. Go to
www.boostLIVE.com for a selection of custom ring
tones and downloading instructions.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
Note: Ring tones purchased from this web site
may be downloaded only once. If you delete
a ring tone from your phone, you must
purchase it again to download it again.
3 Scroll through the list of ring tones and highlight
the one you want to assign.
4 Press m.
5 Select Assign w/Vibe.
6 Select the features you want to set to ring and
vibrate.
64
Managing Memory
Managing Memory
To view the amount of memory available for custom
ring tones:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Highlight any ring tone.
4 Press m.
5 Select Memory Usage.
Deleting custom ring tones frees memory.
Note: Ring tones are stored in your phone using
the same memory space used to store voice
records (see “Voice Records” on page 79),
Deleting voice records frees memory space
for ring tones.
Deleting Custom Ring Tones
To delete a custom ring tone:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll to the ring tone you want to delete.
4 Press m.
5 Select Delete.
6 Press A under Yes to confirm.
65
66
Java applications loaded on your phone can also
request your location. If your phone is connected to
a laptop computer or similar device, software
running on that device can request your location. To
protect your privacy, you can control whether these
requests are granted.
GPS Enabled
Your phone’s GPS Enabled feature uses information
from Global Positioning System (GPS) satellites
orbiting the Earth to determine the approximate
geographical location of your phone, expressed as
latitude and longitude. The availability and accuracy
of this location information (and the amount of time
that it takes to calculate it) will vary depending on
the environment in which you are using the GPS
feature. For example, GPS location fixes are often
difficult to obtain indoors, in covered locations,
between high buildings, or in other situations where
you have not established a clear broad view of the
sky. SEE: “IMPORTANT: Things to Keep in
Mind”.
IMPORTANT: Things to Keep in
Mind
If you are using the GPS feature of your phone while
driving, please give full attention to driving and to the
road.
Where adequate signals from multiple satellites
are not available (usually because your GPS
antenna cannot establish a view of a wide area of
open sky), the GPS feature of your phone WILL
NOT WORK. Such situations include but are not
limited to:
When you make a 911 emergency call, the GPS
feature of your phone can help emergency
personnel locate you if your phone has adequate
access to GPS satellite signals and your emergency
response center is equipped to process such
information.
•
•
In underground locations
Inside of buildings, trains, or other covered
vehicles
You can also use the GPS feature to view your
approximate location. Location information appears
on the phone’s display.
•
•
•
Under any other metal or concrete roof or
structure
Between tall buildings or under dense
tree-cover
Near a powerful radio or television tower
67
GPS Enabled
•
•
When your GPS antenna is covered (for
example, by your hand or other object) or
facing the ground
information and the time needed to obtain it will vary
depending on circumstances, particularly the ability
to receive signals from adequate numbers of
satellites.
In temperature extremes outside the operating
limits of your phone
On emergency calls, your phone uses assistance
information from the phone network to improve the
speed and accuracy of your phone’s location
calculation: if such assistance information becomes
unavailable, it may reduce the speed and accuracy
of the location calculation.
Walking or driving very slowly may also
substantially reduce GPS performance.
Even where location information can be
calculated in such situations, it may take much
longer to do so, and your location estimate may
not be as accurate. Therefore, in any 911 call,
always report the location to the emergency
response center if you can and if you cannot,
remain on your phone for as long as the
emergency response center instructs you.
The satellites used by the GPS feature of your
phone are controlled by the U.S. government and
are subject to changes implemented in accordance
with the Department of Defense GPS user policy
and the Federal Radionavigation Plan. These
changes may affect the performance of the GPS
feature of your phone.
Even where adequate signals from multiple
satellites are available, your GPS feature will
only provide an approximate location, often
within 150 feet (45 meters) but sometimes much
further from your actual location. Advice on how
to improve GPS performance is provided in
“Enhancing GPS Performance” on page 70.
Making an Emergency Call
Dial 911 to be connected to an emergency response
center. If you are on an active call, you must end it
before calling 911.
While the GPS feature of your phone can be a
valuable navigational aid, it does not replace the
need for careful navigating and good judgment.
Never rely solely on one device for navigation.
Remember that the accuracy of the location
When you make an emergency 911 call, the GPS
feature of your phone begins to seek information to
calculate your approximate location. It will take the
GPS feature of your phone some time to
determine your approximate location. Even
where your phone has good access to sufficient
68
Viewing Your Approximate Location
GPS satellite signals and network assist data, it may
take 30 seconds or more to determine the
approximate location. This time will increase where
there is reduced access to satellite signals. When
your approximate location is determined, it is made
available to the appropriate emergency response
center.
If your phone does not have adequate access to
GPS satellites signals, the location of the nearest
cell tower in contact with your phone is automatically
made available to the emergency response center, if
information.
See “Enhancing GPS Performance” on page 70
for information on how to help your phone determine
your location.
In some cases, your local 911 emergency
response center may not be equipped to receive
GPS location information. For this reason, and
because the GPS location information reported is
only approximate or may not be available in your
location (see “IMPORTANT: Things to Keep in
Mind” on page 67), always report your location to
the 911 operator you speak to when making an
emergency call, if able, just as you would when
using a phone without GPS capabilities.
Viewing Your Approximate
Location
1 From the main menu, select GPS > Position.
2 Scroll to view the entire screen.
This displays the following information about the last
time your location was calculated:
Note: If you are concerned about whether your
local 911 emergency response center is
equipped to receive GPS location
•
•
•
The time (as Greenwich Mean Time) and date
that the location was last calculated.
The approximate location, expressed as latitude
and longitude.
information, contact your local authorities.
In general, if your phone has access to signals from
more GPS satellites, your location will be
determined faster and more accurately than if your
phone has access to signals from fewer GPS
satellites.
The estimated accuracy of the calculated
location. This estimate of accuracy is only a very
rough estimate and may vary substantially from
the actual accuracy of the approximate location
information reported.
69
GPS Enabled
•
The number of satellites used to calculate the
location. In general, more satellites make for
better accuracy.
If you received a phone call or alert while attempting
to determine your location, the Position screen will
to determine its location. If it is successful, the new
location information will be displayed the next time
you view the Position screen.
To calculate your location again:
Press A under Rfrsh.
It may take your phone several minutes to complete
the process of determining your location. During this
time, a message usually appears on your phone’s
display saying your phone is scanning for satellites.
For tips on getting the best location calculation, see
“Enhancing GPS Performance”.
Enhancing GPS Performance
unable to complete a location calculation
successfully. If this happens when you are making
an emergency call, the location of the nearest cell
tower in contact with your phone is made available
to the appropriate emergency response center if the
center has the capability to receive such
information. If this happens when you are trying to
view your location on the phone’s display, you will
see a message indicating that your phone cannot
access satellites.
The Position screen displays the updated
information.
To cancel a location calculation before it is
completed:
Press A under Cancel to return to the Position
screen. -or-
Press e to return to the idle screen.
Each time approximate location of your phone is
calculated, the latest location information is stored in
your phone and remains there even when your
phone is powered off. You will see this information
the next time you view the Position screen.
70
Enhancing GPS Performance
To improve accuracy and increase your chances of
a successful calculation, do the following while your
phone is determining your approximate location:
•
Hold your phone to enhance reception. Signals
from GPS satellites are transmitted to your GPS
antenna, which is in your phone antenna. Hold
your phone away from your body, giving the
antenna clear access to satellite signals. Do not
cover the antenna area with your fingers or
anything else.
•
Stay in the open. The GPS feature works best
where there is nothing between your phone and a
large amount of open sky. If possible, go outside,
away from tall buildings and foliage. While
performance in a building is improved by moving
closer to windows, glass with certain sun
shielding films may block satellite signals.
GPS antenna
•
Extend your phone antenna.
•
Stand still. If possible, stand still until your phone
is finished determining your location. Moving your
phone at a walking pace while your phone is
calculating your approximate location may
substantially decrease GPS performance.
71
GPS Enabled
•
In a car. When using the GPS Enabled feature in
a car, position your phone so that the GPS
antenna has good access to GPS signals through
the car’s windows. Typically, the GPS antenna
has best access to GPS signals in a car when
placed near a window.
The almanac contains information about the location
of satellites, their operational status, and other
satellite information. Keeping this information
updated enhances the performance of your GPS
feature. In most cases, your phone will be able to
get a fix in strong satellite signal conditions with
outdated almanac data, but it may take longer.
Note: Although moving your phone at a walking
pace decreases GPS performance, moving
it at the speed of a moving car does not.
Note: When you make an emergency call, your
phone does not rely upon the almanac to
determine your location.
•
Stay in network coverage. Depending on who
your service provider is, the network will provide
your phone with information that helps determine
your location more quickly and accurately.
If your satellite almanac data is out of date, your
phone may prompt you to update it. Follow the
instructions that appear on the phone’s display. You
may be asked to go to a web site or call a customer
care number.
Updating Satellite Almanac
Data
Another way to keep the GPS feature of your phone
working well is to keep your satellite almanac data
up to date.
Setting Privacy Options
Your phone’s GPS privacy options control whether
Java applications on your phone or other software
applications may view the location of your
phone.You may set your phone to one of these GPS
privacy options.
The United States government maintains an
almanac of data about where GPS satellites are as
they orbit the Earth. This information is available to
your phone. Keeping your satellite almanac up to
date helps your phone determine your location more
quickly.
Note: Privacy options do not apply to the
transmission of location information during
emergency 911 calls.
To set your GPS privacy options:
1 From the main menu, select GPS > Privacy.
72
Setting Privacy Options
your GPS PIN. (See “Setting the GPS PIN
Security Feature” on page 73 for more
information.)
To turn the GPS Enabled security feature on or off:
1 From the main menu, select Settings > Security
> GPS PIN.
2 Select On or Off.
3 Enter the current GPS PIN.
3 Select the privacy option you want:
•
Restricted — No Java or similar software
applications may view the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
Note: When you receive your phone, your GPS
PIN is 0000.
4 Press A under Ok.
To change your GPS PIN:
•
•
Unrestricted — All applications may view the
location of your phone, without notifying you.
1 From the main menu, select Settings > Security
> Change Password > GPS PIN.
2 Enter the current GPS PIN.
By Permission — When an application
attempts to view the location of your phone,
you will be prompted to give permission.
However, location information may still be
available to the phone’s owner, fleet manager,
or account administrator.
Note: When you receive your phone, your GPS
PIN is 0000.
3 Press A under Ok.
4 Enter the new 4- to 8-digit GPS PIN.
5 Press A under Ok.
6 Enter the new 4- to 8-digit GPS PIN to confirm.
7 Press A under Ok.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
When you receive your phone, the GPS security
feature is turned off, so you do not have to enter a
GPS PIN to access your GPS privacy options. If you
turn this feature on, you will be required to enter a
GPS PIN to access your GPS privacy options.
73
GPS Enabled
Software Compatibility
Using GPS with Map Software
Your phone sends location information to your
laptop or other device using the standard National
Marine Electronics Association (NMEA) format.
Your phone supports output messages in
NMEA-0183 format and supports the following
RMC, and VTG.
You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running interactive
map software such as that made by DeLorme or
Microsoft. This way, if your phone has good access
to GPS signals, your approximate position on a map
can be made available as you travel in a vehicle.
The map software running on your laptop or other
device must support NMEA 3.0.
To do this, connect your phone to your laptop (or
other device) with a data cable and set your phone
to transmit data (see “Getting Started” on page 74).
Your phone then provides your approximate location
to the device running the map software, which
displays your location on a map. Your phone
provides an updated location every second and the
map software displays your changing location on its
map.
Getting Started
To connect your phone to your laptop or other
device:
1 Open the connector cover.
See “Enhancing GPS Performance” on page 70
for more details on obtaining good location
information.
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone’s battery power quickly.
connector
cover
74
Using GPS with Map Software
Flow control: Hardware
2 With the phone’s display facing up, insert the data
cable’s connector into the accessory connector,
until you hear a click.
•
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 Set NMEA OUT to On.
Your phone is now sending location data to your
laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT is
automatically set to Off.
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
•
•
•
•
Bits per second: 4800
Data bits: 8
Parity: None
Stop bits: 1
75
76
4 Your home page displays.
Boost MobileTM Wireless
Web Services
Note: The first time you access Web, you will be
asked to enable security to ensure your
information remains private and secure.
You can use your phone’s Web feature to access a
suite of wireless data products known as Boost
Mobile Wireless Web. Services include Text
• Press A under Yes. The phone will
display: Generating…, Computing…,
Sending))))).
Messaging, Web and Premium Web, Address Book,
Mobile Email, and wireless access to AOL® Instant
• You may be asked to (re)enable security
as Boost Mobile adds new services or upon
your return to the U.S. after traveling.
MessengerTM
.
With the exception of the Text Messaging Express
service, Boost Mobile Wireless Web Services
require the activation of a Boost Mobile Online
service plan. To order, go to www.boostmobile.com
or call 1-888-BOOST-4U (1-888-266-7848). You
can also contact your Boost Mobile Authorized
Dealership.
• When transmitting highly personal or
sensitive data, such as a credit card
number, you will see the Secure Data icon
E. This icon indicates that the data is
encrypted during transmission.
5 Scroll to highlight the service you wish to access
and press A under Ok. -or-
Starting the Microbrowser
Press the number shown to the left to
automatically jump to that service.
Just as you use Netscape Navigator® or Microsoft®
Internet Explorer to browse the Web from your
desktop, the microbrowser allows you to explore
and use a variety of Internet services. To begin
using the Boost Mobile Wireless Web:
Press * to return to the previous screen.
To return to the home page, press e.
6 To exit the browser, press e until the idle screen
displays. -or-
1 Press m to access the Main Menu.
2 Scroll to Web.
3 Press A under SELECT.
Press and hold m. The Browser Menu screen
displays with Exit Browser highlighted.
77
Boost MobileTM Wireless Web Services
Press A under OK. When you re-enter Web, you
For more information and multimedia demos, go to
www.boostmobile.com. You can also get one page
service-specific guides called Frequently Asked
Questions and other instruction for Boost Mobile
Wireless Web Services at www.boostmobile.com.
will enter on the page from which you exited
Boost MobileTM Wireless Web
Navigation Keys
•
Home — Press e to return to your home page.
Tip: Press e twice to return to your phone's idle
screen.
•
•
Back — Press * to return to a previous screen.
Scroll — A scroll bar on the left of the phone’s
display indicates that additional text can be
viewed. Scroll using the navigation key.
Tip: While navigating through Boost Mobile
Wireless screens, a number may appear to
the left of the application or topic you want to
access. Press the corresponding number on
the keypad for quicker access to that
application or topic.
When transmitting highly personal or sensitive data,
such as a credit card number, this icon Eappears,
indicating that the data is encrypted during
transmission.
Note: You may be asked to (re)enable security as
Boost Mobile adds new services or upon
your return to the U.S. after traveling.
78
To record a phone call:
Voice Records
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself or phone calls.
1 While on an active call, press m.
2 Select Record.
3 When you are finished recording, press O.
Note: Recording of phone calls is subject to
applicable laws regarding privacy and
recording of phone conversations.
Your phone can store up to 20 voice records.
Creating Voice Records
To record a note to yourself:
Playing Voice Records
1 From the main menu, select Record > [New
1 From the main menu, select VoiceRecord.
2 Select the voice record you want to play.
3 To stop the voice record while it is playing, press
O.
VoiceRec].
2 Say the message you want to record into the
microphone.
Tip: To stop recording before you are finished,
press A under Pause. To start recording
again, press A under Resume.
Tip: To fast forward, scroll right. To rewind, scroll
left. To pause or resume, press any key.
Labeling Voice Records
When you create a voice record, it is labeled with
the time and date it was recorded. You can then
rename it with a custom label.
3 When you are finished recording, press O.
To add to the end of voice record:
1 From the main menu, select VoiceRecord.
2 Scroll to the voice record you want to add to.
3 Press m.
4 Select Add To.
5 When you are finished recording, press O.
1 From the main menu, select VoiceRecord.
2 Scroll to the voice record you want to label.
3 Press A under Label.
4 Enter the label you want to assign. See “Entering
Text” on page 31.
79
Voice Records
5 Press O.
4 Select Lock to lock the message. -or-
Select Unlock to unlock the message.
Deleting Voice Records
To delete a voice record:
When a voice record is locked, this icon R appears
next to it.
1 From the main menu, select VoiceRecord.
2 Scroll to the unlocked voice record you want to
delete.
3 Press m.
4 Select Delete.
5 Press O or A under Yes to confirm.
Managing Memory
To view the amount of memory available for voice
records:
1 From the main menu, select VoiceRecord.
2 With [New VoiceRec] highlight, press A under
Memory. -or-
To delete all voice records:
1 From the main menu, select VoiceRecord.
2 Scroll to any voice record.
3 Press m.
With any voice record highlighted, press m.
Select Memory.
To free more memory by deleting all unlocked voice
records:
4 Select Delete All.
5 Press O or A under Yes to confirm.
1 From the voice records memory screen, press A
under Delete.
Locking Voice Records
When you lock a message, it cannot be deleted until
you unlock it.
2 Press O or A under Yes to confirm.
Note: Voice records are stored in your phone
using the same memory space used to
store Java application data, ring tones, and
wallpaper images. Deleting some of these
other items frees memory space for voice
records.
1 From the main menu, select VoiceRecord.
2 Scroll to the voice record you want to lock or
unlock.
3 Press m.
80
To make the call on hold active and put the active
call on hold:
Advanced Calling
Features
Press A under Switch.
Creating Pauses and Waits
While Dialing
You can enter a pause or wait while dialing a
number. For more information on pauses and waits,
see “Creating Pauses and Waits” on page 39.
Putting a Call on Hold
1 While on an active call, press m.
2 Select Hold.
If you want to make the call active again, press A
under Resume.
To create a pause while dialing a phone number:
Calling 2 People
1 From the keypad, enter the digits you want to
occur before the pause.
Putting a Call on Hold, Making a
Second Call
1 Place or receive a phone call.
2 While the call is active, press m.
3 Select 2nd Call. This puts the call on hold.
4 Enter the second phone number you want to call.
2 Press m.
3 Select Insert Pause.
4 Enter the digits you want to occur after the pause.
To create a wait while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the wait.
2 Press m.
3 Select Insert Wait.
Tip: For quick ways to enter the number, press
m.
5 Press s to place the call.
4 Enter the digits you want to occur after the wait.
To end the second call and make the call on hold
active again:
Press e.
81
Advanced Calling Features
To set your phone to call the most recent Boost
Walkie-Talkie number on the recent calls list:
Making International Calls
Your service default is “International Calls
Restricted.” Contact Boost Mobile Customer Care to
obtain international dialing access.
1 From the main menu, select Settings > DC/GC
Options > One Touch DC.
2 Set this option to Last Call.
Calls placed between the United States and Canada
do not require an international access code.
To set your phone to call a Boost Walkie-Talkie
number you choose:
Plus Dialing lets you place an international call to
most countries without entering the local
international access code.
1 From the main menu, select Settings > DC/GC
Options > One Touch DC > Assigned Number.
2 To enter the Boost Walkie-Talkie number you
want your phone to call every time you press the
Boost Walkie-Talkie Button:
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
Enter the number using your keypad. -or-
Press A under Search. Select Contacts, Recent
Calls, or Memo. Select the number you want to
enter.
2 Enter the country code, city code or area code,
and phone number.
3 Press O.
Setting One Touch Boost
Walkie-Talkie
One Touch Boost Walkie-Talkie sets your phone to
call the most recent Boost Walkie-Talkie number on
the recent calls list, or a Boost Walkie-Talkie number
you choose, every time you press the Boost
Walkie-Talkie Button.
To turn off One Touch Boost Walkie-Talkie:
1 From the main menu, select Settings > DC/GC
Options > One Touch DC.
2 Set this option to Off.
82
Setting Flip Actions
Setting Flip Actions
Call Timers
Call timers measure the duration of your phone
calls, Boost Walkie-Talkie, and circuit data use, as
well as the number of Kilobytes sent and received
by your phone:
For Answering Calls
To set your phone to answer calls when you open
the flip:
1 From the main menu, select Settings > Phone
•
•
•
•
Last Call — displays the duration of your most
Calls > Flip Activation > Flip to Ans.
recent phone call.
2 Set this option to On.
Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
To set your phone not to answer calls when you
open the flip:
Phone Lifetime — displays the total minutes of
all your phone calls.
Set Flip to Ans to Off in step 2.
DC (Walkie-Talkie) Reset — keeps a running
total of all of your Boost Walkie-Talkie call
minutes, until you reset it.
DC (Walkie-Talkie) Lifetime — displays the total
minutes of all your Boost Walkie-Talkie calls.
For Ending Calls
To set your phone to end calls when you close the
flip:
•
•
•
•
1 From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to End.
2 Set this option to On.
Circuit Reset — keeps a running total of all of
your circuit data use, until you reset it.
Circuit Lifetime — displays the total minutes of
all of your circuit data use.
To set your phone not to answer calls when you
open the flip:
Kbytes Reset — keeps a running total of the
number of kilobytes sent and received by your
phone, until you reset it.
Set Flip to End to Off in step 2.
Note: If you are using your phone with a headset,
and you have the Flip to End option set to
On, closing your flip sends incoming sound
to the headset and does not end the call.
To view or reset a timer:
1 From the main menu, select Call Timers.
83
Advanced Calling Features
2 To view a feature without resetting: Press O when
TTY device features such as Turbo-Code,
you are finished viewing. -or-
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
To reset a feature: Press A under Reset. Press
O or press A under Yes to confirm.
Turning On the TTY Feature
Your phone’s TTY feature must be on if you want to
make TTY calls, set the TTY mode, or change the
TTY baud rate. To make sure the TTY feature is on:
Note: The values displayed by Call Timers should
not be used for billing. Call timers are
estimates only.
Making TTY Calls
To use your phone to make phone calls using a
teletypewriter (TTY) device:
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a Mode
Your phone supports these TTY modes:
1 Connect one end of a 2.5mm cable into the audio
jack on your phone. Connect the other end of the
cable to your TTY device.
2 Make sure that your phone’s TTY feature is on
and select the TTY mode you want to use.
•
•
•
TTY — You type and read text on your TTY
device.
VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
3 Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone’s display:
To change mode while not in a call:
Phone call is active.
Phone call is on hold.
N
O
1 From the main menu, select Settings > Phone
Calls > TTY > Type.
2 Select the TTY mode you want.
84
Special Dialing Codes
To change the TTY baud rate:
When you make a TTY call, the call begins in the
TTY mode you last selected.
1 From the main menu, select Settings > Phone
Calls > TTY > Baud.
To change mode during a call using your phone:
2 Select the baud rate for your location.
Special Dialing Codes
Call Restrictions
You can prevent your phone from making or
receiving long distance, incoming, and outgoing
(except 911) calls.
1 Press m.
2 Select In Call Setup > TTY > Type.
3 Select the mode you want.
To change mode during a call using your TTY
device, issue one of the following commands:
•
•
•
“VCO please” — to select VCO mode
“HCO please” — to select HCO mode
“HCO off please” — to turn off HCO mode
Contact Boost Mobile Customer Care for more
information.
Important: When you are using HCO, the sound
coming from your phone speaker may be
uncomfortably loud. Use caution when
putting the phone to your ear. (For
information on setting the volume of
your phone speaker, see “Setting the
Volume” on page 97.)
Telecommunications Relay Service
Boost Mobile supports services for communicating
with speech and/or hearing impaired individuals.
You can dial 711 to reach a local
Telecommunications Relay Center. You will then be
connected to your destination number. Relay
service works through a Communications Assistant
who reads messages typed into a TDD/TTY device
by a speech or hearing impaired individual to you.
The Communications Assistant then types your
spoken messages to the hearing or speech impaired
individual. Telecommunications Relay Service is
available 24 hours a day, seven days a week, and
every call is strictly confidential.
Changing the TTY Baud Rate
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within the
U.S. To make calls outside the U.S., set your TTY
baud rate to 50.0.
85
Advanced Calling Features
Note: Using 711 to reach Telecommunications
Relay Service may not be available in all
areas.
Per-Line Blocking
You can permanently block delivery of your phone
number on every call you make.
Additional Phone Features
Contact Boost Mobile Customer Care to obtain
these services or for additional information:
To disable on a per-call basis:
Press * 8 2 before dialing the call.
Call Restrictions
You can prevent your phone from making or
receiving long distance, incoming, and outgoing
(except 911) calls.
Note: Some services are not available outside of
the continental United States.
Caller ID
Boost MobileTM 411
Your phone can automatically display the phone
number or name (if the 10-digit phone number is
stored in your Contacts) of the person calling
(unless blocked by the caller), enabling you to
decide whether to take the call or forward it to voice
mail.
The Directory that puts you straight through — Now
there is no need to make 2 calls, memorize a
number, or hunt for a pen to write a number down.
Boost Mobile 411 is your mobile directory service
that connects you straight through to the number
you want.
Caller ID information is not available on all calls.
Per-Call Blocking
You can block delivery of your phone number to
other Caller ID units for a single phone call:
White Page Listings
You can request a telephone number for any
person, business, or government agency in the
continental United States and Hawaii. Operators can
also provide address information if available.
Press * 6 7 before dialing the call.
Your Boost Mobile phone number cannot be
blocked from calls made to 911, 800, 855, 866, 877,
888, or other toll- free phone numbers.
86
Additional Phone Features
Yellow Page Listings
Movie Listings and Show Times
You can ask the operator to perform a search by
category if the specific business name is unknown.
For example, you can request information for a surf
shop near your home or school.
Boost Mobile 411 operators have access to movie
listings at most theaters in the continental United
States and Hawaii. You only need to ask for a
specific movie or movie theater to get current
movies, locations or show times. Additional
information such as running time, synopsis, and
ratings are also available. Show times and listings
are available 24-48 hours in advance.
Nationwide Call Completion
Boost Mobile 411 operators can connect you to any
listing in the continental United States and Hawaii. If
requested, the operator will stay on the line while
connecting to the number.
Local Event Information
You can request information on local events such as
sporting events, concerts, state and county fairs and
other current events. Boost Mobile 411 operators
can provide dates, times, and locations for these
events.
Driving Directions
Boost Mobile 411 operators are able to provide
directions to reach a specific destination. Operators
will work with you to determine your starting point
and provide clear directions to the destination.
Restaurant Reservations
Boost Mobile 411 operators can assist in finding a
restaurant and then coordinate reservations. A
Boost Mobile 411 operator will confirm your
reservation information through a return phone call.
For your convenience, the reservation will be in your
name.
Note: Reservation service may not be available
for all restaurants.
87
88
•
A reminder — If an event has a start time, you
can set Datebook to remind you that the event is
going to start.
Datebook
Datebook stores up to 250 events. You can store
events over a 13 month period — 12 months after
and 1 month before the current date.
•
•
a ring tone for the reminder
a profile that your phone is switched to while the
event is occurring
A Datebook event may contain:
•
a Java application that starts when the event
starts
•
•
•
A subject — A name you assign to the event. You
can also enter a phone number or Boost
Walkie-Talkie number. After the event is stored,
you can call this number from Datebook or when
you get a reminder of this event.
Only the subject and date are required.
Viewing Datebook
To access Datebook:
A location — The location of the event. You can
also enter a phone number or Boost Walkie-Talkie
number. After the event is stored, you can call this
number from Datebook or when you get a
reminder of this event.
From the main menu, select Datebook.
You can view Datebook by the day, by the week, or
by the month. You can also view the details of any
event.
A start time — The start time automatically
assigned to an event is the beginning of the day.
You can change the start time, or assign no start
time, before storing the event.
In day view, brief information about each event for
that day appears.
•
•
A duration — the length of time the event lasts
In week view, events appear as markers
corresponding to their times.
A date — The date automatically assigned to an
event is the date that was highlighted or selected
when you began creating the event. You can
change this date before storing the event.
A repeat — lets you store the event as a recurring
event.
In month view, days with events appear with a
marker in the corner.
To view an event:
•
1 Select the day the event occurs.
89
Datebook
2 Select the event.
Creating Events
Every Datebook event must have a subject and be
stored to a date. Other information is optional.
To change the current view:
1 While viewing Datebook, press m.
2 Select the view you want.
You may enter the information in any order by
scrolling through the event details.
Note: Day view is the default setting.
After you have entered the information you want,
you can press A under Done to store the event to
Datebook.
Navigating Datebook
To scroll through Datebook:
If you decide you don’t want to store the event:
Press A under Cancel.
Scroll left and right using the navigation key. -or-
In week view and month view, press * or #.
To see more in day view:
To create a Datebook event:
1 While viewing datebook, press A under New. -or-
In day view, select [New Event].
2 To assign a subject to the event:
Select Subject.
Scroll up and down using the navigation key.
To highlight a day in month view:
Enter the date using the keypad.
To go to today’s date:
Enter the name. See “Entering Text” on page 31.
-or-
1 While viewing Datebook, press m.
2 Select Go To Today.
Press A under Browse to choose from common
To go to any date in Datebook:
event names. -or-
1 While viewing Datebook, press m.
2 Select Go To Date.
3 Select the date you want.
Enter a phone number, Boost Walkie-Talkie ID
number. After the event is stored, you can call this
number.
When you are finished, press O.
90
Creating Events
3 If you want to assign a location to the event:
Enter the date you want.
Select Location.
7 If you want to make the event a recurring event:
Select Repeat.
Enter the location. See “Entering Text” on page
31. -or-
Select the repeat cycle you want.
Enter a phone number or Boost Walkie-Talkie ID
number. After the event is stored, you can call this
number.
If the event occurs more than once a week: Select
Multiple Day. Select the days you want.
Press A under Done.
When you are finished, press O.
Select the date you want this event to stop
recurring.
4 The start time automatically assigned to an event
is the beginning of the day. If you want to change
the start time or assign no start time:
8 If you want to create reminder for this event.
Select Reminder.
Select Start.
Enter the start time you want. -or-
Press A under No Time to assign no start time.
5 If you want to assign a duration to the event:
Select Duration.
Select the reminder time you want. -or-
Select Custom to enter a reminder time.
Note: If an event has no start time, you can not
create a reminder for it.
9 If you have entered all the information you want
for this event, press A under Done. -or-
Select the duration you want. -or-
Select Custom to enter a duration.
If you want to assign a ring tone, a profile, or a
Java application to the event, see “Assigning
More Options”.
6 The date automatically assigned to an event is
the date that was highlighted or selected when
you began creating the event. To change the date
of the event:
Select Date.
91
Datebook
Assigning More Options
To assign more options before storing an event:
Editing Events
To change the details of an event:
1 If you have created a reminder for the event and
1 Highlight the day the event occurs.
2 Select the event.
3 Press A under Edit.
want to set the ring tone for that reminder:
Select Ring Tone.
Select the ring tone you want from the ring tones
stored in your phone.
4 Follow the applicable instructions in “Creating
Events” on page 90 to edit the various fields.
2 If you want to assign a profile that your phone is
To copy an event to another date:
switched to while the event is occurring:
1 Highlight the day the event occurs.
2 Select the event.
Select Profile.
Select the profile you want from the profiles
stored in your phone.
3 Press m.
4 Select Copy.
Your phone switches to this profile when the
event starts and switches back to the previous
profile when the event ends.
5 Press A under Yes to confirm.
6 Enter the date you want.
7 Press O.
8 If you want to change more information, follow the
applicable instructions in “Creating Events” on
page 90 to edit the various fields.
3 If you want to assign a Java application to start
when the event starts:
Select App.
Select the application you want from the Java
applications stored in your phone.
Deleting Events
1 Select the day the event occurs.
2 Select the event.
3 Press m.
If you created a reminder for this event, your
phone prompts you to start the Java application
when you get the reminder.
4 Select Delete.
92
Receiving Reminders
5 If the event is a recurring event, press O or press
For Events with Java Applications
If you assigned a Java application to start when the
event starts, you can start the application when you
get the reminder.
A under Yes to confirm. -or-
If the event is a recurring event:
Select This Event Only to delete only the event
selected in step 2.
1 Press m.
Select Repeat Event to delete all occurrences of
the event.
2 Select Launch.
For Events with Numbers to Call
Receiving Reminders
If you created a reminder for a Datebook event,
when the reminder time occurs, your phone notifies
you with text on the display and a reminder tone.
If you stored a phone number, Boost Walkie-Talkie
number, or Talkgroup number in the Subject or
Location field of a Datebook event, you can call or
send a call alert to that number from the reminder for
that event.
To view more details about the event:
Open the flip. -or-
Making Calls From Datebook
Press A under View.
If you stored a phone number or Boost Walkie-Talkie
number in the Subject or Location field of a
Datebook event, you can call or send a call alert to
that number from Datebook.
To dismiss the reminder:
If the flip is closed, press . or open the flip. -or-
If the flip is open, press O, press A under
You can call the number stored in Subject and the
number stored in Location if one is a phone number
and the other is a Boost Walkie-Talkie number. If
both are the same type of number, the number in
Subject is called or sent a call alert. To call or send
a call alert to the number stored in Location, you
must delete the number stored in Subject.
Dismiss, or close the flip.
Tip: You can set your phone to power on when
you receive a reminder. See “Customizing
Datebook Setup” on page 94.
93
Datebook
To make a call or send a call alert:
•
•
Daily Begin — sets the beginning of your day.
This is the earliest time of day displayed in week
view, if you have a 12-hour day view.
1 Highlight or select the event containing the
number you want to call or send a call alert to.
2 To make a phone call:
Reminders — If this option is set to Only When
On, your phone reminds you of events only when
it is on. If this option is set to Always, your phone
powers itself on when you receive reminders. To
avoid draining the battery, your phone then
powers itself off after a short time.
Press s. -or-
Press m. Select Call # in Event.
To make a Boost Walkie-Talkie call:
Press and hold the Boost Walkie-Talkie Button on
•
•
Delete After — sets the amount of time Datebook
the side of your phone. -or-
waits to delete an event after is occurs.
Time Shift — lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
To send a call alert:
Press m. Select Alert # in Event.
•
•
Alert Timeout — sets the amount of time a tone
continues to sound when you receive a message
notification, call alert, or Datebook reminder.
Customizing Datebook Setup
To access Datebook set up options:
Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
1 From the main menu, select Datebook.
2 Press m.
3 Select Setup.
You can view or change these options:
•
Start View — sets Datebook to start in day view,
week view, or month view when you access
Datebook.
94
8 Press A under Done.
Shortcuts
Shortcuts lets you access most menu options by
pressing a number on your keypad or saying the
voice name of the shortcut. You create the shortcut
and then use it to take you to that screen any time.
Using a Shortcut
If you know the shortcut number:
1 From the idle screen, press m.
2 On your keypad, press the number assigned to
Creating a Shortcut
1 Go to the menu item you want to create a shortcut
for.
the shortcut.
If you do not know the shortcut number:
1 From the main menu, select Shortcuts.
For example, if you want to create a shortcut to
the screen for creating a new Contacts entry:
From the main menu, select Contacts > [New
Contact].
2 Scroll to the shortcut you want to use. -or-
If you assigned a voice name to the shortcut:
Press t. Say the voice name into your phone.
The shortcut with that voice name is then
highlighted.
2 Press and hold m until a confirmation screen
appears.
3 Press O or press A under Yes.
3 Press O.
4 Select Key.
5 Press the key number you want to assign to the
shortcut.
Editing a Shortcut
To change the number assigned to a shortcut:
6 Press O.
1 From the main menu, select Shortcuts.
2 With any shortcut highlighted, press m.
3 Select Reorder.
4 Highlight the shortcut you want to move.
5 Press A under Grab.
7 If you want to record a voice name for the
shortcut: Select Voice. As directed by the screen
prompts, say and repeat the name you want to
assign to the number. Speak clearly into the
microphone.
95
Shortcuts
6 Scroll to the place where you want the shortcut to
appear.
7 Press A under Insert.
8 Repeat step 4 through step 7 for all the items you
want to move.
9 Press A under Done.
To change the name or number assigned to a
shortcut:
1 From the main menu, select Shortcuts.
2 Highlight any shortcut.
3 Press A under Edit.
Deleting Shortcuts
To delete a shortcut:
1 From the main menu, select Shortcuts.
2 Scroll to the shortcut you want to delete.
3 Press m.
4 Select Delete.
5 Press O or press A under Yes to confirm.
To delete all shortcuts:
1 From the main menu, select Shortcuts.
2 With any shortcut highlighted, press m.
3 Select Delete All.
4 Press O or press A under Yes to confirm.
96
To set your phone to vibrate instead of making a
sound when you receive Boost Walkie-Talkie calls,
even if you want your phone to ring for other
features:
Customizing Your Phone
Setting the Volume
1 From the main menu, select Settings > Boost
Walkie-Talkie > Alert Type.
Of the Earpiece and Speaker
1 From the main menu, select Settings > Volume.
2 Scroll to Earpiece to set the earpiece volume.
-or-
main menu, select Ring Tones. Make sure
Vibe All is set to Off. Repeat step 1.
Scroll to Speaker to set the speaker volume.
3 To set the volume:
2 Select Vibrate to set your phone to vibrate. -or-
Select Silent to set your phone to neither vibrate
nor make a sound.
Scroll left or right. -or-
Press the volume controls.
Of the Ringer
Using a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and the
speaker at the same time:
Press the volume controls.
Setting Your Phone to Vibrate
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to the
headset only. -or-
To set your phone to vibrate instead of making a
sound when you receive phone calls, Boost
Walkie-Talkie calls, message notifications, and call
alerts, see “Setting Your Phone to Vibrate” on page
63.
Select Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
97
Customizing Your Phone
Note: If you are using your phone with a headset,
and you have the Flip to End option set to
On, closing your flip sends incoming sound
to the headset and does not end the call.
See “Setting Flip Actions” on page 83.
Changing the Look of Your
Phone
Wallpaper
To change the wallpaper that appears on the idle
screen:
Using a Remote Boost Walkie-Talkie
Button
If you are using a headset or other accessory with a
remote Boost Walkie-Talkie Button, you can use the
remote Boost Walkie-Talkie Button for phone calls
and Boost Walkie-Talkie calls.
1 From the main menu, select Settings >
Display/Info > Wallpaper.
2 Scroll to the wallpaper you want.
3 If you want to see what the wallpaper looks like,
press A under View.
4 Press O.
For phone calls, use the remote Boost Walkie-Talkie
Button to answer calls, switch between calls, and
end calls. Hold the remote Boost Walkie-Talkie
Button for less than 2 seconds to answer calls and
switch between calls. Hold the remote Boost
Walkie-Talkie Button for more than 2 seconds to end
calls.
Setting Text Size
To set the size of the text on the full-size display:
1 From the main menu, select Settings >
Display/Info > Text Size.
For Boost Walkie-Talkie calls, use the remote Boost
Walkie-Talkie Button as you would the Boost
Walkie-Talkie Button on your phone.
2 Select the option you want:
•
•
•
Zoom — 11 characters per line
Standard — 14 characters per line
Compressed — 18 characters per line
98
Temporarily Turning Off Calls
To set your phone to briefly display very large digits
when you enter numbers at the idle screen:
Temporarily Turning Off Calls
Sometimes you may want to have your phone on,
but turn off its ability to make and receive calls, such
as when you are on an airplane.
1 From the main menu, select Settings >
Display/Info > Large Dialing.
2 Set this option to Large Digits.
To set your phone so that it can not make or receive
phone calls, Boost Walkie-Talkie calls, or transfer
data:
Setting Contrast
To set the contrast of the display:
1 From the main menu, select Settings >
Advanced > Airplane Mode.
2 Set this option to On.
1 From the main menu, select Settings >
Display/Info > Contrast.
2 To set the contrast of the full-sized display, select
Int. Display. -or-
This icon Uappears.
To restore your phone’s ability to do all these things:
Set this option to Off.
To set the contrast of the one-line display, select
Ext. Display.
3 Scroll left or right to set the contrast.
Using Settings
Settings contains many submenus that let you
customize your phone.
Setting the Menu View
You can set the items on your main menu and Java
applications menu to appear as large icons or a list:
For information on applying groups of setting to your
phone together, see “Profiles” on page 107.
1 From the main menu, select Settings >
Display/Info > Menu View. -or-
Display/Info Features
The Display/Info menu controls how the keypad and
display appear:
From the main menu: Press m. Select Main
Menu Setup > Menu View.
2 To choose a list, select List View. -or-
To choose large icons, select Icon View.
99
Customizing Your Phone
•
•
Wallpaper — changes the wallpaper that appears
Phone Calls Features
The Phone Calls menu controls how your phone
handles phone calls:
on the idle screen.
Palette — changes the color scheme of the
display.
•
•
•
•
Set Line — sets phone line 1 as the active line for
•
•
Text Size — sets size of text on the display.
outgoing calls.
Home Icons — controls whether main menu
icons appear on the idle screen.
Any Key Ans — If this feature is on, you can
answer calls by pressing any key on the keypad.
•
Backlight — A backlight lights the display and
keypad when you make or receive a call, open or
close the flip, or press keys or buttons. Backlight
controls how long the backlight stays on; Sensor
sets the keypad backlight to light up only in low
light conditions.
Auto Redial — sets your phone to automatically
redial calls you make when the system is busy.
Auto Ans — sets your phone to automatically
answer an incoming call after a specified number
of rings. When this feature is on, the phone
answers by connecting you to the caller; it does
not send the call to voice mail, unless you are out
of coverage or on the line.
•
•
•
Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
•
•
•
Flip Activation — See “Setting Flip Actions” on
Menu View — controls whether the items on your
main menu and Java applications menu appear
as large icons or a list.
page 83.
Minute Beep — causes a beep to sound every
minute of an active call.
Large Dialing — sets large digits to appear on
the idle screen when you enter a number.
Call Duration — causes the duration of a call to
appear on the display when the call ends.
•
•
Contrast — sets the contrast of the display.
•
•
TTY — See “Making TTY Calls” on page 84.
Language — sets the language that your phone
displays.
Notifications — See “Setting Notification
Options” on page 51.
100
Using Settings
•
Java App Control — If you have installed a Java
application that answers phone calls, this setting
lets you turn that application on.
•
•
•
•
Left Key — sets the main menu item you access
access when you scroll right from the idle screen.
DC/GC Options Features
The DC/GC Options menu controls how your phone
handles Boost Walkie-Talkie calls:
Center Key — sets the main menu item you
access when you press O from the idle screen.
Left Sftkey — sets the main menu item you
access when you press the left option key from
the idle screen.
•
One Touch DC — See “Setting One Touch Boost
Walkie-Talkie” on page 82.
•
Alert Type — controls how your phone notifies
you when you receive Boost Walkie-Talkie calls.
See page 97.
•
•
Right Sftkey — sets the main menu item you
access when you press the right option key from
the idle screen.
Power Up — sets the main menu item you see
when you power on your phone. To set the idle
screen to be the first thing you see when you
power on your phone, select Default Ready.
Personalize Features
The Personalize menu makes main menu items
easier to access.
•
Menu Options — Reorder Menu lets you
change the order of the items on the main menu
by grabbing and moving them; Add/Remove
Apps lets you create a shortcut to a Java
application on the main menu.
Up Key — sets the main menu item you access
when you scroll up from the idle screen.
Volume Features
The volume menu sets the volume of sounds your
phone makes:
•
•
Line 1 — sets ringer volume for phone line 1.
•
•
Messages — sets the volume of message
notifications and Datebook reminders.
Down Key — sets the main menu item you
access when you scroll down from the idle
screen.
•
Earpiece — sets the volume of sound coming out
of the earpiece.
101
Customizing Your Phone
•
•
•
Speaker — sets the volume of sound coming out
•
•
•
SIM PIN — enables and disables your phone’s
SIM PIN security feature. See “Turning the PIN
Requirement On and Off” on page 15.
of the speaker.
Keypad — sets the volume of sound associated
with pressing keys and buttons.
GPS PIN — enables and disables your phone’s
GPS PIN security feature. See “Setting the GPS
PIN Security Feature” on page 73.
Java Earpiece — sets the volume of sound
associated with Java applications coming out of
the earpiece.
Change Passwords — changes your phone
unlock code, security code, SIM PIN, and GPS
PIN.
•
•
Java Speaker —sets the volume of sound
associated with Java applications coming out of
the speakers.
Advanced Features
The Advanced menu contains advanced and rarely
used Settings features.
Data — sets the volume of sounds that notify you
that you are receiving a circuit data call.
Security Features
The Security menu lets you turn security features on
and off and change passwords:
•
Alert Timeout — sets the amount of time a tone
continues to sound when you receive a message
notification, call alert, or Datebook reminder.
•
•
Headset/Spkr — sets headset option. See “Using
•
Phone Lock — turns on a feature that locks your
phone, either immediately or automatically after a
set period of inactivity. An unlock code is required
to enable this feature, to unlock the phone, and to
set a new Unlock code. Contact your service
provider for your default unlock code.
a Headset” on page 97.
Disco Lights — sets the circle around the earport
cup on the front of the flip to light up when a
musical ring tone sounds.
•
Connectivity — Network ID sets the phone’s
network IDs and their roaming options under the
direction of your service provider; Master Reset
lets your service provider reset your service in the
event of a security or provisioning problem.
•
Keypad Lock — locks the phone’s keypad, either
immediately or automatically after a set period of
inactivity.
102
Using Settings
•
Reset Defaults — Reset Settings returns all
settings to their original defaults; Reset All
returns all settings to their original defaults and
erases all stored lists. Use only under the
direction of your service provider.
•
•
Return to Home — controls how long the recent
calls list displays after calls.
Airplane Mode — prevents your phone from
making or receiving phone calls, Boost
Walkie-Talkie calls or transferring data.
•
Baud Rate — sets the baud rate at which your
phone communicates with a laptop computer, PC,
or similar device.
103
104
You'll want to keep this information handy so that
you can replace the battery and power up your
phone should the representative need you to access
other information on it during your call.
Boost Mobile Customer
Care
You can contact Boost Mobile Customer Care 7
days a week simply by dialing 611 from your i730
phone, or by calling 1-888-BOOST-4U
(1-888-266-7848). Our Boost Mobile Customer Care
team will assist you in answering all your questions.
Or, visit boostmobile.com for a variety of Boost
Mobile Customer Care services online.
Before you contact Boost Mobile Customer Care for
service or to resolve an issue, be sure to have your
Boost Mobile Personal Telephone Number, your
model number (located on your phone underneath
the battery), and the ID number printed on your SIM
card. You’ll want to record these numbers, and keep
them handy, so that you can replace the battery
prior to contacting Boost Mobile Customer Care.
Please have the following information available to
give to the representative who answers your inquiry.
•
•
Your Personal Telephone Number (PTN).
Your phone's model number (located underneath
the battery).
•
The ID numbers printed on your SIM.
105
106
Viewing Profiles
Profiles
A profile is a group of settings saved together so that
you can apply them to your phone easily.
1 From the main menu, select Profiles.
2 Select the profile you want to view.
A profile contains these settings:
•
•
•
Ring Tones — sets all options described in “Ring
Tones” on page 63, except assigning ring tones to
Contacts.
phone has a checkmark next to it.
3 Press A under View.
4 Scroll and select settings to view their values.
Display/Info — sets Wallpaper, Color Palette,
Text Size, and Backlight options. See
“Display/Info Features” on page 99.
Switching Profiles
To apply a profile to your phone:
Phone Calls — sets Set Line and Auto Ans
options. See “Phone Calls Features” on page
100.
1 From the main menu, select Profiles.
2 Scroll to the profile you want to apply.
3 Press O.
•
•
Volume — sets all options described in “Volume
Features” on page 101.
Call Filter — controls which calls, call alerts, and
message notifications your phone responds to.
See “Setting Call Filtering” on page 110.
Advanced — sets headset option. See “Using a
Headset” on page 97.
The profile you selected is now in effect.
How Changing Settings Affects
Profiles
•
Many of the settings contained in profiles can be set
without switching or editing profiles — for example,
by selecting Settings or Ring Tones to set options,
or by setting the volume of the phone’s ring using
the volume controls.
Your phone arrives with pre-set profiles. You can
also create your own profiles.
107
Profiles
When you do this, your phone either:
A temporary profile stays in effect until you switch
profiles, power off your phone, or delete it (or the
profile it is based on) from the list of profiles.
•
Updates the profile in effect to reflect these
changes, without notifying you -or-
If you do not store a temporary profile, it is deleted
when you switch profiles or power off your phone.
•
Creates a temporary profile that contains these
changes
A temporary profile is automatically given the same
name as the profile it is based on, but with an
asterisk (*) in front of it.
To set your phone to create a temporary profile that
contains changes you make to settings:
1 From the main menu, select Profiles.
2 Press m.
3 Select Setup > Temp Profile.
4 Set this option to On.
When you view a temporary profile’s settings, the
options that differ from the profile it is based on have
an asterisk in front of them.
Storing a Temporary Profile
To store a temporary profile as a new profile:
To set your phone to update the profile in effect to
reflect any changes you make to settings:
1 From the main menu, select Profiles.
2 Scroll to the temporary profile.
3 Press m.
4 Select Store As New.
5 Enter the name you want to give the profile. See
“Entering Text” on page 31.
Set Temp Profile to Off in step 4.
Temporary Profiles
If your phone is set to create temporary profiles, a
temporary profile is created when you make
changes to settings without switching or editing
profiles.
When you are finished, press O.
A temporary profile is based on the profile in effect
when you made the changes, but reflects the
changed settings. Making more changes further
updates the temporary profile, for as long as it is in
effect.
To overwrite the profile that temporary profile is
based on:
1 From the main menu, select Profiles.
2 Scroll to the temporary profile.
108
Creating Profiles
3 Press m.
4 Select Store Changes.
Editing Profiles
1 From the main menu, select Profiles.
2 Scroll to the profile you want to edit.
3 Press m.
The temporary profile is stored with the name of the
profile it is based on. The profile it is based on, as it
existed before you made changes to settings, is
gone.
4 Select Edit.
5 Follow the applicable instructions in “Temporary
Profiles” to edit the various fields.
Creating Profiles
1 From the main menu, select Profiles.
2 Select [New Profile]. -or-
Deleting Profiles
To delete a profile:
Scroll to any profile. Press m. Select New.
1 From the main menu, select Profiles.
2 Select the profile you want to delete.
3 Enter the name you want to give the profile. See
“Entering Text” on page 31.
Note: A temporary profile is automatically deleted
When you are finished, press O.
when the profile it is based on is deleted.
4 If you want to base this profile on an existing
profile: Select Copy from. Select the profile you
want to base this profile on. If you do not choose
a profile to copy from, the new profile is based on
a default profile.
5 Press A under Create.
6 Scroll through the list of options and set their
values.
3 Press m.
4 Select Delete.
5 Press O or press A under Yes to confirm.
To delete all profiles:
1 From the main menu, select Profiles.
2 Press m.
3 Select Delete All.
7 Press A under Done.
4 Press O or press A under Yes to confirm.
109
Profiles
•
•
Off sets your phone to notify you of all Private
Setting Call Filtering
The call filtering setting in each profile lets you
control which calls, call alerts, and message
notifications your phone notifies you of, and which it
ignores.
calls.
On sets your phone to ignore all Private calls.
5 To set filtering options for call alerts, select Alerts.
•
Off sets your phone to notify you of all call
alerts.
On sets your phone to ignore all call alerts.
To set call filtering:
•
1 While setting options for a profile, select Call
Filter.
2 To set filtering options for phone calls, select
Phone.
6 To set filtering options for message notifications,
select Notifications.
•
•
Off sets your phone to notify you of all
messages.
•
Off sets your phone to notify you of all phone
calls.
Voice Messages sets your phone not to sound
a tone or vibrate when you receive voice
messages.
Text Messages sets your phone not to sound a
tone or vibrate when you receive text
messages.
•
•
All sets your phone to ignore all phone calls.
All Contacts sets your phone to notify you only
of phone calls from numbers stored in
Contacts.
•
•
•
Some Cntcs sets your phone to notify you only
of phone calls from numbers you select from
Contacts.
All sets your phone not to sound a tone or
vibrate when you receive any message.
Note: When you receive a type of message you
have set not to sound a tone or vibrate, the
messages notification screen appears as
usual.
3 If you set the Phone option to Some Cntcs,
select up to 5 Contacts entries that contain phone
numbers you want to be notified of calls from.
When you are finished, press A under Done.
7 Press A under Done.
4 To set filtering options for Private calls, select
Prvt.
110
Status
Status
Message Description
Understanding Status
Messages
Messages Messages
(one-line
display)
(full-screen
display)
You may receive status messages under certain
conditions. Before contacting Boost Mobile Customer
Care, note the message, numeric code, and the
conditions under which it appeared. The following
table lists and describes the status messages.
This service is temporarily
not available. Please try
again later.
Failed
Please Try
Later
The phone that you called
is busy in a Boost
Walkie-Talkie call.
Busy in Prvt. User Busy in
Boost
Walkie-Talkie
call
Note: When your battery door is closed, the
one-line display screen shows a shortened
version the status messages displayed in
the full-size screen. To see complete status
messages, open the battery door.
The phone that you called
is busy using Boost Mobile
Wireless Web services.
Busy in Data User Busy in
Data
Status
Status
Message Description
This service was restricted
by Boost Mobile, or this
service was not
Restricted
Service
Restricted
Messages Messages
(one-line
display)
(full-screen
display)
purchased.
You are either out of
coverage or having
problems with
The number that you
entered is not valid.
Not Avail.
Service Not
Available
Number Not Number Not in
in Service
Service
provisioning.
The phone that you called
is either busy, out of
coverage, or turned off.
Please try again later.
Not Avail.
User Not
Available
The system is
experiencing heavy traffic.
Please try again later.
System
Busy
System Busy
The person that you called
has not purchased this
service.
Not Avail.
User Not
Authorized
111
Understanding Status Messages
Status
Status
Message Description
Status
Status
Message Description
Messages Messages
Messages Messages
(one-line
display)
(full-screen
display)
(one-line
display)
(full-screen
display)
You have attempted to
reach a Boost Mobile
customer using One Touch
Boost Mobile, but there is
no Boost Mobile number
stored in your recent calls
list.
An operational fault was
detected with your phone.
Note the numeric code,
turn your phone off, and
contact Boost Mobile
Customer Care.
Failed
No Dispatch
Number Stored
Self Check
Self Check Fail
+ Number Code
The incorrect PIN was
entered three consecutive
times. You will be unable
to place or receive calls on
your phone. Contact Boost
Mobile Customer Care to
have them obtain the PIN
Unblocking Key (PUK)
code.
PIN Blocked PIN Blocked
Call Your
An error occurred. Please
try again.
Try Again
Please Try
Again
Provider
You have entered an
incorrect PIN number.
No message. Wrong PIN
You have inserted a SIM
that will not work with a
Boost Mobile phone.
No message. Please Enter
Special Code
Your SIM card is not being
detected. Please check to
ensure that you have
inserted the SIM correctly
into your phone.
Contact Boost Mobile
Customer Care if you
believe this is a valid SIM.
Insert SIM
Insert SIM
A fault was detected with
your phone. If this error
recurs, note the error code
and contact Boost Mobile
Customer Care.
Self Check
Self Check
Error + Number
Code
Please check your SIM to
make sure it has been
inserted properly.
Check SIM
Enter PIN
Check SIM
Card
Please enter your 4- to 8-
digit SIM PIN code.
Enter SIM PIN
112
Status
Status
Message Description
Messages Messages
(one-line
display)
(full-screen
display)
Auto Phone Lock is
activated. Enter you
unlock code.
Unit Lock
Enter Unlock
Code
Warns of low memory for
Web Alerts.
Low Memory New Browser
Message
Memory Full!
Searching for GPS
satellites.
Scanning for
Satellites
Could not find GPS
satellites.
Unable to
Locate Sats
Directs you to update GPS
satellite almanac data.
For Update
Visit:
A problem occurred in
your phone’s GPS
Technical Error
circuitry. If this error
occurs, contact Boost
Mobile Customer Care.
113
114
conditions of the then-current applicable
Boost MobileTM Terms
Service/Subscriber Agreement will control. The
Service is provided to you through the Company as
agent for, and using the Digital Mobile Network (the
“System”) of, Nextel Communications, Inc. and its
affiliates and subsidiaries (collectively, “Nextel”). All
rights and protections afforded to the Company by
this Agreement are also afforded to Nextel through
Nextel’s principal-agent relationship with the
Company.
and Conditions of Service
TERMS AND CONDITIONS OF PREPAID
SERVICE: PLEASE READ THESE TERMS AND
CONDITIONS CAREFULLY. THEY CONSTITUTE
A BINDING AGREEMENT (the “Agreement”)
BETWEEN YOU AND BOOST MOBILE.
You (“Customer”) accept the terms of this
1. SERVICE ACTIVATION - To activate the Service
and the call credits in your BOOST MOBILE
Agreement (a) by calling to activate BOOST
MOBILESM wireless communications services
(“Service”), (b) by purchasing BOOST MOBILE
wireless communications equipment (the
Activation Guide, you must call our free automated
service number before the date shown. Remember
that by calling this number to activate your service,
you are agreeing to these Terms and Conditions of
Prepaid Service. By activating the Service you also
authorize Company to exchange with its related
business entities, contractors or agents who may be
involved in providing the Service, any customer
information you may have provided to Company that
is necessary for these related businesses,
“Equipment”) or Service or replenishing your airtime
through boostmobile.com, or (c) by signing this
Agreement, whichever applies. By using the
Equipment, you subscribe to the Service provided
by Boost Mobile (sometimes “Company”). If you
have not signed a printed copy of this Agreement
and do not accept these terms, do not activate your
phone; you may return your phone for a full refund,
within 10 days of purchase, to the retail store where
you purchased it. Should there be any conflict
between the terms and conditions below, and the
terms and conditions of any applicable
contractors, and entities to assist the Company in
providing the Service. Company may suspend or
cancel the Service at any time without notice if: (i)
there are reasonable grounds to suspect the
information provided by Customer to Boost Mobile
or its agent for user registration or when you
Service/Subscriber Agreement between Customer
and Company covering the Equipment
accompanying the Activation Guide, the terms and
activated your Service, was incomplete or incorrect
or if there has been fraud or misuse by you in
115
Boost MobileTM Terms and Conditions of Service
relation to the Service; (ii) you breach any of the
terms or conditions in this Agreement; or (iii) you do
anything which in the Company’s opinion, may
cause damage to the System. In addition, Service
may be suspended, changed or terminated without
notice.
Mobile will be under no obligation to replace them or
compensate you. If Boost Mobile does choose to
replace your SIM card, you may be charged a
replacement fee.
4. USE OF SERVICE – Customer agrees to comply
with all statutes, rules and regulations applicable to
Customer, including all applicable rules of the
Federal Communications Commission (the “FCC”).
Customer will not use the Service for any unlawful
purpose. Customer will not use the Service in
aircraft or in motor vehicles in violation of law,
regulation or ordinance. Customer acknowledges
and agrees that all future purchases of Company
Services and Equipment by customer shall be
governed by the terms and conditions contained
herein unless Customer and Company enter into a
subsequent Service/Subscriber Agreement.
Company may change this Agreement at any time.
Any changes are effective when Company provides
Customer with written notice stating the effective
date of the change(s). If Customer elects to use the
Services or make any payment to Company on or
after the effective date of the changes, Customer is
deemed to have accepted the change(s). If
Customer does not accept the changes, Customer
may terminate Services as of the effective date of
the changes.
2. CALL CREDITS – Your call credits are valid for
the Call Credit Validity Period, i.e., from the date of
their activation, until the call credit expiration date.
Refer to your rate plan table for details. You may
purchase additional RE-BOOSTTM Cards at any time
but you must activate them by calling the designated
BOOST MOBILE Customer Care number before the
expiration date of the RE-BOOST Card. If you don’t
use your call credits or replenish your service within
the Call Credit Validity Period, your call credits will
expire and your mobile number will be withdrawn at
the end of a 60-day Grace Period. There is a limit of
$300 in call credits that may be aggregated on your
service at any time. RE-BOOST Cards can be used
once only. Call credits are not transferable or
redeemable for cash.
3. SIM CARDS – The BOOST MOBILE pre-paid
SIM card remains the property of Boost Mobile at all
times. Should your BOOST MOBILE pre-paid SIM
card or RE-BOOST Card(s) be lost or stolen, Boost
116
5. CUSTOMER MOBILE DIGITAL EQUIPMENT –
Customer must have a Company approved handset
or device and must be a BOOST MOBILE Service
customer to access the Service. Company is not
responsible for the installation, operation, quality of
transmission, or maintenance of the Equipment.
Any change in Service or Equipment may require
additional programming or Equipment or changes to
assigned codes or numbers that may require
programming fees. Company reserves the right to
change or remove assigned codes and/or numbers
when such change is reasonably necessary in the
conduct of its business. Customer does not have
any proprietary interest in such codes or numbers.
Although Federal and state laws may make it illegal
for third parties to listen in on service, complete
privacy cannot be guaranteed. Company shall not
be liable to Customer or to any third party for any
eavesdropping on or interception of communications
from Company’s System.
Walkie-Talkie call transmissions originated by a
handset begins when a connection is established
with Company facilities. A new BOOST
Walkie-Talkie call is initiated by a call participant if
that participant responds more than six (6) seconds
after the other party finishes its BOOST MOBILETM
CONNECT transmission. Customer accepts
responsibility for Airtime charges from incoming
telephone calls to the handset from the time that
Customer responds to the call. Service charges
may apply to some service options when Customer
calls the BOOST MOBILETM Customer Service
number 1-888-BOOST-4U (1-888-266-7848). If
Customer disputes any Service charges, Customer
must submit a written explanation within forty five
(45) days from the date Company debits Customer’s
account for the disputed Service. If Company
determines that an error was made with respect to
any disputed Service charges, Company shall credit
Customer’s account in the amount of the error. If
Customer does not pay the amount in dispute owed
to Company, Company may exercise any remedies
it may have under this Agreement for non-payment
of Service charges. Company reserves the right to
modify any and all elements of the Service charges
at any time by giving notice of such changes to
Customer. If Customer continues to use the Service
after the Company has provided such notice,
Customer will be deemed to have accepted the
changes, and such changes will be effective
6. RATES, CHARGES, AND PAYMENT – You will
be charged for your use of the Service in
accordance with the terms of the BOOST MOBILE
Rate Plan, as found in your BOOST MOBILE
handset kit or online at www.boostmobile.com. You
may request a copy of this document from Boost
Mobile at any time. Customer agrees to pay
Company, on a prepay basis, for charges by
Company for the Service. Customer acknowledges
that chargeable time for telephone calls and BOOST
117
Boost MobileTM Terms and Conditions of Service
immediately upon Customer’s use of the Service
following notice of the changes, unless the
Company’s communication indicates a later
effective date. If Customer does not accept the
changes, Customer must immediately cease all use
of the Service.
memory or other Equipment limitation. Only certain
Internet sites may be accessed, and certain BOOST
MOBILE Wireless Web Services may not be
available in all Company Service areas.
8. APPLICATION CUSTOMER CARE AND
SUPPORT – Customer acknowledges and agrees
that in most cases, the developer of an Application
is responsible for providing customer care and
Application support to all Customers using the
Application. In the event Customer contacts
Company customer care with a problem concerning
the use of an Application, Customer may be referred
to the Application developer’s customer care, and
Company shall have no obligation to support such
Application.
7. BOOST MOBILE WIRELESS WEB SERVICES –
BOOST MOBILE Wireless Web Services, consisting
of certain applications such as Internet, email, data
and other wireless information services (the
“Applications”) are part of the Services that can be
obtained through Company. Certain Applications
offered through Company or authorized third parties
may be compatible with the Equipment and/or the
Service offered by Company. Customer
acknowledges and agrees that there is no
9. CONTENT; INTELLECTUAL PROPERTY
RIGHTS – Company is not a publisher of the third
party content that Customer may access from time
to time through BOOST MOBILE Wireless Web
Services; therefore, Company is not responsible for
the content provided by such third parties, including
but not limited to statements, opinions, graphics,
photos, music, services and other information
(“Content”), and accessed by Customer through
Boost Mobile Wireless Web Services. Company
gives no guarantee or assurance as to the currency,
accuracy, completeness or utility of Content
guarantee or assurance that the Applications are
compatible, or will continue to be compatible, with
Company’s System or any of its Equipment or
Service offerings. Such compatibility shall not be
construed as an endorsement of a particular
Application or a commitment on the part of
Company that Application(s) will continue to be
compatible with the System, Equipment or Service
for any period of time. Company reserves the right,
in its sole discretion, to disable or discontinue any
Application for any reason. Use of BOOST MOBILE
Wireless Web Services requires a wireless Internet
compatible phone, and is subject to any storage,
obtained through BOOST MOBILE Wireless Web
Services. Company, Content providers and others
118
have proprietary interests in certain Content.
Customer shall not reproduce, broadcast, distribute,
sell, publish, commercially exploit or otherwise
disseminate such Content in any manner, or permit
others to do so, without the prior written consent of
Company, Content providers, or others with
responsible for such Charges regardless of whether
the Charge is imposed upon the sale of equipment
or services, upon Customer, or upon Company. If
any such Charge is determined to be applicable and
has not been paid by Customer before Customer
accepts delivery of equipment, Customer shall pay
Company the full amount of any such Charge no
later than ten (10) days after receipt of the invoice
therefor.
proprietary interests in such Content, as applicable.
10. RISK OF LOSS: INSURANCE – Upon
Customer’s acceptance of delivery of the
Equipment, all risk of loss, damage, theft, or
destruction to the Equipment shall be borne by the
Customer. No such loss, damage, theft, or
destruction of the Equipment, in whole or part, shall
impair the obligations of Customer hereunder,
including, without limitation, responsibility for the
payment of Service Charges due hereunder.
12. COVERAGE AREA – Local Dispatch (BOOST
Walkie-Talkie), cellular calling, BOOST MOBILE
Wireless Web Services, and respective coverage
areas for these Services are subject to change at
any time at the sole discretion of Company.
13. DEFAULT / TERMINATION - If you breach any
representation to Company or fail to perform any of
the promises you made in this Agreement, you will
be in default and Company may, without notice to
you, suspend Service and/or terminate this
Agreement, in addition to all other remedies
available to us. You agree to pay all costs including
reasonable attorneys fees, collection fees, and court
costs Company may incur in enforcing this
11. TAXES, FEES, SURCHARGES &
ASSESSMENTS – Customer is responsible for all
federal, state, and local taxes, fees, surcharges, and
other assessments (collectively, “Charges”) that are
imposed on telecommunications services, other
services, and equipment or that are measured by
gross receipts from the sale of telecommunications
services and/or equipment. Such Charges shall
include, but are not limited to: excise taxes; sales
and transaction taxes; utility taxes; regulatory fees
and assessments; universal service assessments,
telephone relay service (TRS) assessments;
recoveries or similar charges. Customer shall be
Agreement through any appeals.
14. LIMITATION AND CONDITION OF LIABILITY;
INDEMNITY - Company does not assume and shall
have no liability for (i) failure to deliver the
Equipment within a specified time period; (ii)
unavailability or delays in delivery of the Equipment
119
Boost MobileTM Terms and Conditions of Service
or the Services; (iii) damage due directly or indirectly
to causes beyond the control of Company, including,
but not limited to acts of God, acts of the public
enemy, acts of the government, acts or failure to act
of the Customer, its agents, employees or
subcontractors, fires, floods, epidemics, quarantine
restrictions, corrosive substances in the air or other
hazardous environmental conditions, strikes, freight
embargoes, inability to obtain materials or services,
commotion, war, unusually severe weather
conditions or default of Company’s subcontractors
whether or not due to any such causes; or (iv) the
use of BOOST MOBILE Wireless Web Services,
including but not limited to the accuracy or utility of
any information acquired from the Internet through
BOOST MOBILE Wireless Web Services; or Internet
Services, Content or Applications whether or not
supported by Company. Without limiting the
NOR FOR ECONOMIC LOSS, PERSONAL
INJURIES OR PROPERTY DAMAGES
SUSTAINED BY THE CUSTOMER OR ANY THIRD
PARTIES ARISING OUT OF THE SERVICES.
UNDER NO CIRCUMSTANCES WILL NEXTEL, IN
CONJUNCTION WITH WHICH THE COMPANY
PROVIDES THE SERVICES, BE LIABLE TO
CUSTOMER FOR ANY DAMAGES, OF ANY KIND
WHATSOVER, REGARDLESS OF THE FORM OF
ACTION OR CAUSE OF ACTION, ARISING OUT
OF THE SERVICES. CUSTOMER IRREVOCABLY
WAIVES ANY CLAIM YOU MIGHT OTHERWISE
HAVE AGAINST NEXTEL ARISING OUT OF THE
SERVICES AND COVENANTS NOT TO MAKE OR
BRING ANY CLAIM OF ANY KIND AGAINST
NEXTEL ARISING OUT OF THE SERVICES.
Customer agrees to indemnify, defend, and hold
Company and Nextel harmless from any Customer
violations of FCC rules and regulations or Customer
violation of any statutes, ordinances or laws of any
local, state, or federal public authority. The terms of
this Section 14 will survive any termination or
expiration of this Agreement
foregoing, the Company’s sole liability for Service
disruption, whether caused by the negligence of the
Company or otherwise, is limited to a credit
allowance not exceeding an amount equal to the
proportionate charge to the Customer for the period
of Service disruption. EXCEPT AS OTHERWISE
SET FORTH IN THE PRECEDING SENTENCE, IN
NO EVENT WILL THE COMPANY BE LIABLE FOR
ACTUAL, CONSEQUENTIAL, INCIDENTAL,
SPECIAL OR OTHER INDIRECT DAMAGES
ARISING OUT OF THE SERVICES, WHETHER
CAUSED BY ITS NEGLIGENCE OR OTHERWISE,
15. RESOLUTION OF DISPUTES -. PLEASE
READ THIS SECTION CAREFULLY. IT AFFECTS
RIGHTS THAT YOU MAY OTHERWISE HAVE. IT
PROVIDES FOR RESOLUTION OF MOST
DISPUTES THROUGH ARBITRATION INSTEAD
OF COURT TRIALS AND CLASS ACTIONS.
ARBITRATION IS FINAL AND BINDING AND
120
SUBJECT TO ONLY VERY LIMITED REVIEW BY A
COURT. THIS ARBITRATION CLAUSE SHALL
SURVIVE TERMINATION OR EXPIRATION OF
THIS AGREEMENT.
its own counsel, experts, witnesses and
preparation and presentation of evidence at the
arbitration.
C. WAIVER OF PUNITIVE DAMAGE CLAIMS
AND CLASS ACTION. By this Agreement, both
Customer and Company are waiving certain
rights to litigate disputes in court. If for any
reason the arbitration clause is deemed
inapplicable or invalid, Customer and Company
both waive, to the fullest extent allowed by law,
any right we might otherwise have to recover
punitive or exemplary damages and any right to
pursue any claims on a class or consolidated
basis or in a representative capacity.
A. ARBITRATION PROCEDURES. YOU MUST
FIRST PRESENT ANY CLAIM OR DISPUTE TO
US BY CONTACTING BOOST MOBILE
CUSTOMER CARE, IN WRITING, TO ALLOW
US THE OPPURTUNITY TO RESOLVE THE
DISPUTE. You may invoke arbitration if your
claim or dispute is not resolved within 60 days
after we receive your detailed written description
of the dispute or claim and the circumstances
giving rise to it. The arbitration of any dispute or
claim shall be conducted in accordance with the
Wireless Industry Arbitration rules (“WIA Rules”)
of the American Arbitration Association (“AAA”),
as modified by this Agreement. You and we
agree that this Agreement evidences a
transaction in interstate commerce and the
arbitration will be interpreted and enforced in
accordance with the WIA Rules and the laws of
the Commonwealth of Virginia. The arbitration
will be conducted at a location in Reston, Virginia,
to be designated by the Company.
16. COMPLETE
AGREEMENT/SEVERABILITY/WAIVER – This
Agreement sets forth all of the agreements between
the parties concerning the Services and purchase of
the Equipment, and there are no oral or written
agreements between them other than as set forth in
this Agreement. No amendment or addition to this
Agreement shall be binding upon this Company
unless it is in writing and signed by both parties
(and, in the case of the Company, by an officer of
the Company). Should any provision of this
Agreement be found illegal or in contravention of the
law, such provision shall be considered null and void
but the remainder of this Agreement shall not be
affected thereby. The failure of Company, at any
B. COST OF ARBITRATION. All administrative
fees and expenses of an Arbitration will be
divided equally between you and Company. In all
arbitrations, each party will bear the expense of
121
Boost MobileTM Terms and Conditions of Service
time to require the performance by Customer of the
provisions of this Agreement shall not affect in any
way the right to require such performances at any
later time, nor shall the waiver by Company of a
breach of any provision hereof be taken or held to
be a waiver of compliance with or breach of any
other provision or a continuing waiver of such
provision.
provided hereunder may not be able to identify your
location to emergency services and you may not
always be connected to the appropriate emergency
services provider. Additionally, the provision of 911
or other emergency services may be conditioned on
payment of amounts to the governmental authorities
who implement or coordinate access to such
services, and Customer agrees that Company may
apportion and pass through such amounts to
Customer, which shall be paid by Customer when
due, in connection with Customer’s access to such
911 or other emergency services, where available.
CUSTOMER AGREES TO HOLD COMPANY AND
NEXTEL HARMLESS AGAINST ANY AND ALL
CLAIMS, DEMANDS, ACTIONS, OR CAUSES OF
ACTION (INCLUDING ALL ACTIONS BY THIRD
PARTIES) ARISING OUT OF THE USE OR
ATTEMPTED USE OF THE COMPANY’S
17. ASSIGNMENT/RESALE/GOVERNING LAW –
This Agreement may be freely assigned by
Company to any successor of it or any other firm or
entity capable of performing its obligations
hereunder, and upon any such assignment,
Company shall be released from all obligations to
Customer. Customer may not assign this
Agreement, or resell the services that are subject to
this Agreement without prior written consent of
Company. Subject to the restrictions contained
herein, this Agreement shall bind and inure to the
benefit of the successors and permitted assigns of
the parties hereto. The laws of the Commonwealth
of Virginia, without application of its conflicts of laws
principles, shall govern this Agreement.
SERVICE TO ACCESS 911 OR OTHER
EMERGENCY SERVICES.
19. NO WARRANTY (SERVICE) – NEITHER
COMPANY NOR NEXTEL MAKES ANY
WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE TO
CUSTOMER IN CONNECTION WITH ITS USE OF
THE SERVICE. IN NO EVENT SHALL COMPANY
OR NEXTEL BE LIABLE FOR INCIDENTAL,
CONSEQUENTIAL OR OTHER INDIRECT
18. NOTICE REGARDING USE OF SERVICE FOR
911 OR OTHER EMERGENCY CALLS – The
Service provided hereunder does not interact with
911 and other emergency services in the same
manner as landline telephone service. Depending
on the circumstances of a particular call, the Service
122
DAMAGES TO THE FULL EXTENT THE SAME
MAY BE DISCLAIMED BY LAW. CUSTOMER
ACKNOWLEDGES THAT SERVICE
INTERRUPTIONS WILL OCCUR FROM TIME TO
TIME, AND AGREES TO HOLD COMPANY AND
NEXTEL HARMLESS FOR ALL SUCH
INTERRUPTIONS.
OTHERWISE PROVIDED HEREUNDER. THERE
ARE NO WARRANTIES THAT EXTEND BEYOND
THE DESCRIPTION CONTAINED HEREIN.
CUSTOMER ASSUMES THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE
EQUIPMENT. UNLESS OTHERWISE AGREED
BY COMPANY, IF THE EQUIPMENT PROVES
DEFECTIVE, THE COSTS OF ALL NECESSARY
SERVICING AND REPAIR WILL BE BORNE BY
CUSTOMER.
20. NO WARRANTY (EQUIPMENT) – NEITHER
COMPANY NOR NEXTEL MAKES ANY
WARRANTIES OR REPRESENTATIONS OF ANY
KIND, STATUTORY, EXPRESS OR IMPLIED, TO
CUSTOMER OR TO ANY OTHER PURCHASER
OF THIS EQUIPMENT. WITHOUT LIMITING THE
FOREGOING, NEITHER COMPANY NOR NEXTEL
MAKES ANY EXPRESS OR IMPLIED
21. DEFINITIONS – For purposes of this
Agreement: 1) “Call Credit Validity Period” means
the number of days, from the date of call credit
activation until the date of call credit expiration, set
out in the relevant rate plan; 2) “RE-BOOST Card”
means the Boost Mobile card containing additional
call credits which may be purchased from
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
CUSTOMER HEREBY WAIVES, AS AGAINST
COMPANY AND NEXTEL ALL OTHER
participating outlets or the voucher number and
expiration date provided to customers when
additional call credits are purchased without a card
being provided, as applicable; 3) “Grace Period”
means the 60 day period commencing on the date
of Call Credit expiration, and ending on the date of
account cancellation.
WARRANTIES, GUARANTEES, CONDITIONS, OR
LIABILITIES, EXPRESS OR IMPLIED, ARISING BY
LAW OR OTHERWISE. IN NO EVENT SHALL
COMPANY, OR NEXTEL BE LIABLE FOR
CONSEQUENTIAL, SPECIAL, OR INCIDENTAL
DAMAGES, WHETHER OR NOT OCCASIONED
BY THEIR NEGLIGENCE AND INCLUDING,
WITHOUT LIMITATION, LIABILITY FOR ANY
LOSS OR DAMAGE RESULTING FROM THE
INTERRUPTION OR FAILURE IN THE
OPERATION OF ANY EQUIPMENT SOLD OR
123
124
•
•
United States Federal Communications
Commission, Code of Federal Regulations; 47
CFR part 2 sub-part J.
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
American National Standards Institute (ANSI) /
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1992.
READ THIS INFORMATION BEFORE USING YOUR
INTEGRATED MULTI-SERVICE PORTABLE
RADIO.
•
•
•
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1999 Edition.
International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998.
Ministry of Health (Canada). Safety Code 6. Limits
of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range
from 3 kHz to 300 GHz, 1999.
RF Operational Characteristics
Your radio product contains a radio frequency
transmitter to convey the information you wish to
send as well as occasional automatic signals used to
sustain connection to the wireless network, and a
receiver which enables you to receive communication
and connection information from the network.
•
•
Australian Communications Authority
Radiocommunications (Electromagnetic Radiation
- Human Exposure) Standard 2003.
ANATEL, Brasil Regulatory Authority, Resolution
256 (April 11, 2001) “additional requirements for
SMR, cellular and PCS product certification.”
Portable Radio Product
Operation and EME Exposure
To assure optimal radio product performance and
make sure human exposure to radio frequency
electromagnetic energy is within the guidelines
set forth in the above standards, always adhere
to the following procedures:
Your Motorola radio product is designed to comply
with the following national and international
standards and guidelines regarding exposure of
human beings to radio frequency electromagnetic
energy (EME):
125
Safety and General Information
•
•
Phone or Two-way radio mode: one inch (2.5
cm)
Data operation using any data feature with or
without an accessory cable: one inch (2.5 cm)
Phone Operation
When placing or receiving a phone call, hold your
radio product as you would a wireline telephone.
Speak directly into the microphone.
Antenna Care
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
radio product and may violate FCC regulations.
Two-way radio operation
When using your radio product as a
traditional two-way radio, hold the
radio product in a vertical position
with the microphone one to two
inches (2.5 to 5 cm) away from the lips.
DO NOT hold the antenna when the radio product
is “IN USE”. Holding the antenna affects call quality
and may cause the radio product to operate at a
higher power level than needed.
Body-worn operation
To maintain compliance with FCC RF exposure
guidelines, if you wear a radio product on your body
when transmitting, always place the radio product in
a Motorola approved clip, holder, holster, case or
body harness for this product. Use of
non-Motorola-approved accessories may exceed
FCC RF exposure guidelines. If you do not use a
Motorola approved body-worn accessory and are
not using the radio product in the intended use
positions along side the head in the phone mode
or in front of the face in the two-way radio mode,
then ensure the antenna and the radio product
are kept the following minimum distances from
the body when transmitting
Approved Accessories
For a list of approved Motorola accessories call
1-800-453-0920, or visit our website at
www.mot.com/iden.
126
Portable Radio Product Operation and EME Exposure
ALL MODELS WITH FCC ID AZ489FT5824 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES.
body) as required by the FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 1.186 W/kg and when tested on the body, as described
in this user guide, is 1.15 W/kg during packet data
transmission. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC
requirements.)2
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the
Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards
that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and
health.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and
can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
AZ489FT5824.
The exposure standard for wireless mobile phones employs
a unit of measurement known as the Specific Absorption
1
Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.
Tests for SAR are conducted using standard operating
positions reviewed by the FCC with the phone transmitting at
its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
1 In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for
the public and to account for any variations in
measurements.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that is does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
2
The SAR information reported to the FCC includes the
FCC-accepted Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this
product.
127
Safety and General Information
Electro Magnetic
Interference/Compatibility
Medical Devices
Pacemakers
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed or otherwise
configured for electromagnetic
compatibility.
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum separation
of 6 inches (15 cm) be maintained between a
handheld wireless radio product and a pacemaker.
These recommendations are consistent with those of
the U.S. Food and Drug Administration.
Facilities
Persons with pacemakers should:
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio product in
any facility where posted notices instruct you to do
so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
•
ALWAYS keep the radio product more than 6
inches (15 cm) from their pacemaker when the
radio product is turned ON.
•
•
Not carry the radio product in a breast pocket.
Use the ear opposite the pacemaker to minimize
the potential for interference.
Aircraft
•
Turn the radio product OFF immediately if you
have any reason to suspect that interference is
taking place.
When instructed to do so, turn off your radio product
when on board an aircraft. Any use of a radio product
must be in accordance with applicable regulations
per airline crew instructions.
Hearing Aids
Some digital wireless radio products may interfere
with some hearing aids. In the event of such
interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
128
Operational Warnings
Other Medical Devices
Operational Warnings
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician
may be able to assist you in obtaining this
information.
!
For Vehicles with an Air Bag
Do not place a portable radio product in the area over
the air bag or in the air bag deployment area. Air
bags inflate with great force. If a portable radio is
placed in the air bag deployment area and the air bag
inflates, the radio product may be propelled with
great force and cause serious injury to occupants of
the vehicle.
Use While Driving
Check the laws and regulations on the use of radio
products in the area where you drive. Always obey
them.
Potentially Explosive Atmospheres
When using the radio product while driving, please:
Turn off your radio product prior to entering any area
with a potentially explosive atmosphere, unless it is a
radio product type especially qualified for use in such
areas as “Intrinsically Safe” (for example, Factory
Mutual, CSA, or UL approved). Do not remove,
install, or charge batteries in such areas. Sparks in a
potentially explosive atmosphere can cause an
explosion or fire resulting in bodily injury or even
death.
•
•
•
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or
answering a call if driving conditions so require.
Note: The areas with potentially explosive
atmospheres referred to above include
fueling areas such as below decks on
boats, fuel or chemical transfer or
storage facilities, areas where the air
contains chemicals or particles, such as
grain, dust or metal powders, and any
129
Safety and General Information
other area where you would normally be
Cleaning and Drying Considerations
advised to turn off your vehicle engine.
Areas with potentially explosive
atmospheres are often but not always
posted.
Using a leather carry case may help protect the
surfaces and help prevent liquids (e.g., rain) from
entering into the interior of the radio product. This
product is not water proof, and exposing the unit to
liquids may result in permanent damage to the unit.
Blasting Caps and Areas
If your radio product interior gets wet, then do not try
to accelerate drying with the use of an oven or a dryer
as this will damage the radio product and void the
warranty. Instead, do the following:
To avoid possible interference with blasting
operations, turn off your radio product when you are
near electrical blasting caps, in a blasting area, or in
areas posted: “Turn off two-way radio”. Obey all signs
and instructions.
1 Immediately power off the radio product.
2 Remove Battery and SIM card (if so equipped)
Operational Cautions
from radio product.
!
3 Shake excess liquid from radio product.
4 Place the radio product and battery in an area that
is at room temperature and has good air flow.
5 Let the radio product, battery, and SIM card dry for
72 hours before reconnecting the battery and/or
powering on the radio product.
Batteries
All batteries can cause property damage and/or
bodily injury, such as burns if a conductive material
such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a
pocket, purse, or other container with metal objects.
To reduce the risk of injury, batteries should not be
exposed to fire, disassembled, or crushed.
If the radio product does not work after following the
steps listed above, contact your dealer for servicing
information.
130
Accessory Safety Information
Clean the external surfaces of the radio product with
a damp cloth, using a mild solution of dishwashing
detergent and water. Some household cleaners may
contain chemicals that could seriously damage the
radio product. Avoid the use of any petroleum-based
solvent cleaners. Also, avoid applying liquids directly
on the radio product.
•
To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
•
•
Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet immediately
and discontinue its use.
Accessory Safety Information
Important: Save these accessory safety instructions.
•
•
Before using any battery or battery charger, read
all the instructions for and cautionary markings on
(1) the battery, (2) the battery charger, which may
include a separate wall-mounted power supply or
transformer, and (3) the radio product using the
battery.
•
•
•
Use of a non-recommended attachment to a
battery charger may result in a risk of fire, electric
shock, or injury to persons.
Make sure the battery charger power cord is
located so that it will not be stepped on, tripped
over, or subjected to damage or stress.
An extension cord should not be used with any
battery charger unless absolutely necessary. Use
of an improper extension cord could result in a risk
of fire and electric shock. If an extension cord must
be used, make sure that:
Do not expose any battery charger to water, rain,
or snow as they are designed for indoor or
in-vehicle use only.
Warning: To reduce the risk of injury,
charge only the rechargeable batteries
!
described in “Battery” on page 7. Other
types of batteries may burst, causing
personal injury and damage.
•
The pins on the plug of the extension cord are
the same number, size, and shape as those on
the plug of the charger.
•
The extension cord is properly wired and in
good electrical condition.
131
Safety and General Information
•
•
The cord size is 18AWG for lengths up to 100
feet and 16AWG for lengths up to 150 feet.
Do not operate any battery charger if it has
received a sharp blow, has been dropped, or
has been damaged in any way; take it to a
qualified service technician.
•
Do not disassemble a battery charger; take it to
a qualified service technician when service or
repair is required. Incorrect reassembly may
result in a risk of electric shock or fire.
•
•
•
•
Maximum ambient temperature around the
power supply or transformer of any battery
charger should not exceed 40°C (104°F).
The output power from the power supply or
transformer must not exceed the rating given on
the Desktop Dual-Pocket Charger.
The disconnection from the line voltage is made
by unplugging the power supply from the AC
receptacle.
To reduce risk of electric shock, unplug any
battery charger from the outlet before attempting
any maintenance or cleaning.
For optimum charging performance, turn off the radio
product while charging it in any battery charger.
132
MOTOROLA LIMITED
WARRANTY
PRODUCTS COVERED LENGTH OF
COVERAGE
Note: FOR IDEN SUBSCRIBER PRODUCTS,
ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES
OR CANADA
Products as defined
above.
One (1) year from the
date of purchase by the
first consumer purchaser
of the product.
What Does this Warranty Cover?
Accessories as defined One (1) year from the
Subject to the exclusions contained below,
Motorola, Inc. warrants its Motorola iDEN Digital
Mobile and Portable Handsets ("Products"),
Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and
Motorola software contained on CD-Roms or other
tangible media and sold for use with these Products
("Software") to be free from defects in materials and
workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is a
consumer's exclusive remedy, and applies as
follows to new Products, Accessories and
Software purchased by consumers in the United
States or Canada, which are accompanied by
this written warranty:
above.
date of purchase by the
first consumer purchaser
of the product.
Products or
Accessories that are
The balance of the
original warranty or for
Repaired or Replaced. ninety (90) days from
the date returned to the
consumer, whichever is
longer.
Software as defined
Ninety (90) days from
the date of purchase.
above. Applies only to
physical defects in the
media that embodies the
copy of the software (e.g.
CD-ROM, or floppy disk).
133
MOTOROLA LIMITED WARRANTY
What is not covered? (Exclusions)
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, including
without limitation, software changes, or modification
in any way by someone other than Motorola, or its
authorized service centers, are excluded from
coverage.
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Altered Products. Products or Accessories with (a)
serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or
that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are
excluded from coverage.
Abuse & Misuse. Defects or damage that result
from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d)
other acts which are not the fault of Motorola, are
excluded from coverage.
Communication Services. Defects, damages, or
the failure of Products, Accessories or Software due
to any communication service or signal you may
subscribe to or use with the Products, Accessories
or Software is excluded from coverage.
Software Embodied in Physical Media. No
warranty is made that the software will meet your
requirements or will work in combination with any
hardware or software applications provided by third
parties, that the operation of the software products
will be uninterrupted or error free, or that all defects
in the software products will be corrected.
Use of Non-Motorola Products and Accessories.
Defects or damage that result from the use of
Non-Motorola branded or certified Products,
Accessories, Software or other peripheral
equipment are excluded from coverage.
134
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media
(e.g. software that is downloaded from the internet),
is provided "as is" and without warranty.
You will receive instructions on how to ship the
Products, Accessories or Software, at your expense,
to a Motorola Authorized Repair Center. To obtain
service, you must include: (a) a copy of your receipt,
bill of sale or other comparable proof of purchase;
(b) a written description of the problem; (c) the name
of your service provider, if applicable; (d) the name
and location of the installation facility (if applicable)
and, most importantly; (e) your address and
telephone number.
Who is covered? This warranty extends only to the
first consumer purchaser, and is not transferable.
What will Motorola Do? Motorola, at its option, will
at no charge repair, replace or refund the purchase
price of any Products, Accessories or Software that
does not conform to this warranty. We may use
functionally equivalent
reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software or
applications added to your Product, Accessory or
Software, including but not limited to personal
contacts, games and ringer tones, will be reinstalled.
To avoid losing such data, software and applications
please create a back up prior to requesting service.
What Other Limitations Are There? ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY,
OTHERWISE THE REPAIR, REPLACEMENT, OR
REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS
How to Obtain Warranty Service or Other
Information? To obtain service or information,
please call:
PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO
EVENT SHALL MOTOROLA BE LIABLE,
WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF
THE PURCHASE PRICE OF THE PRODUCT,
ACCESSORY OR SOFTWARE, OR FOR ANY
INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF
Motorola iDEN Customer Services
1-800-453-0920 or 954-723-4910
TTY-877-483-2840
Or visit us online at
http://www.motorola.com/iden/support
135
MOTOROLA LIMITED WARRANTY
BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY
TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the
limitation or exclusion of incidental or
consequential damages, or limitation on the
length of an implied warranty, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights that vary
from state to state or from one jurisdiction to
another.
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted Motorola software such as the exclusive
rights to reproduce and distribute copies of the
Motorola software. Motorola software may only be
copied into, used in, and redistributed with, the
Products associated with such Motorola software.
No other use, including without limitation
disassembly of such Motorola software or exercise
of the exclusive rights reserved for Motorola, is
permitted.
136
Java and all other Java-based marks are
Patent and Trademark
Information
trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
All other product or service names are the property
of their respective owners. All trademarks, service
marks and trade names used in this Guide are
protected by state, federal and/or international
trademark laws. All rights reserved. Printed in the
U.S.A.
© 2003 Boost Worldwide, Inc. All rights reserved.
BOOST, BOOST and Logo, BOOST MOBILE,
BOOST MOBILE and Logo, and the Logo are
trademarks and/or service marks of Boost
Worldwide, Inc.
NEXTEL®, the NEXTEL logo®, PTT and design®,
Software Copyright Notice
NEXTEL ONLINE®, PUSH TO TALKTM, PTTTM
,
DIRECT CONNECTTM, GROUP CONNECTTM and
NEXTEL WORLDWIDE® are service marks,
trademarks, and/or registered trademarks owned by
Nextel Communications, Inc.
The Motorola products described in this manual may
include copyrighted Motorola and third party
software stored in semiconductor memories or other
media. Laws in the United States and other
countries preserve for Motorola and third party
software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to
distribute or reproduce the copyrighted software.
Accordingly, any copyrighted software contained in
the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in
any manner to the extent allowed by law.
Furthermore, the purchase of the Motorola products
shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents, or patent applications
MOTOROLA, the Stylized M Logo and all other
trademarks indicated as such herein are trademarks
of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2003
Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are
registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437, U.S.
Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
137
Patent and Trademark Information
of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free
license to use that arises by operation of law in the
sale of a product.
138
Call alerts 27
deleting 28
redialing 24, 100
Speed Dial 24
TTY, see TTY calls
Turbo Dial 24
Index
queue 27
receiving 27
responding 27, 28
sending 27
sorting 28
A
Accessories 18
safety 131
Advanced Calling Features 81
Alpha mode 31
voice name 24
Clock 100
viewing 28
Call forwarding 55
all calls 55
missed calls 55
off 55
Call Timers 83
Calls
Contacts 23, 35
capacity 39
B
Backlight 100
Battery
creating entries 36
deleting 39
editing entries 38
icons 35
International numbers 40
searching 36
SIM card 35
storing fast 38
storing from idle screen 38
storing from Memo 38, 41
storing from recent calls 29,
38
care 9
charging 7, 8
door 5
inserting 7
safety 130
answering with any key 22
emergency 26
ending 22
from Contacts 23
from Datebook 24
from memo 41
from Recent calls 23
international 82
on hold 81
Baud rate 103
Boost 78
Boost Mobile Customer Care 105
Boost Mobile Voice Mail 43
Boost Walkie-Talkie
using One Touch 25
type 29, 35
viewing 36
voice name 38
C
Call Alerts 27
receiving 22
139
Index
almanac data 72
best results 70
emergency calls 26, 68
map software 74
privacy options 72
security 73
D
Datebook 24
Dialing codes
J
Java Applications 57
Java applications
deleting 58
non-emergency numbers 85
telecommunications relay
service 85
memory 59, 80
Display
viewing location 69
GPS PIN 102
GPS, see GPS Enabled
K
backlight 100
contrast 99, 100
options 11
screen 11
Keypad 4
locking 17, 102
H
L
Handset, see phone
Language 100
Lists, see menus
E
I
Email 37
Icons
receiving 54
sending 54
Emergency calls 26
End key 4
Entering 31
M
Contacts 35
Recent calls 29
status 14
Memo 41
calling from 41
creating 41
editing 41
storing to Contacts 38, 41
viewing 41
text entry 31
Idle screen 11
storing to Contacts 38
International numbers 82
calling 82
F
Flip action 21, 22, 83
Memory
G
Java applications 59, 80
ring tones 65
voice records 80
storing 40
Internet
Getting Started 3
GPS Enabled 67
140
Menu key 4, 12
Menus 12
voice mail 44
Passwords 102
Information 137
Pauses
dialing 81
storing 39
Personalize 101
Phone 3, 11
storing to Contacts 29, 38
viewing 29
Redialing 24, 100
Ring Tones 63
Ring tones 35, 63
deleting 65
context-sensitive 4, 12
main menu 13
Message notifications 51
setting options 51
Messages 51
reading 54
downloading 64
memory 65
off 63
receiving 51
Messages, text Text
sending 52
flip action 21, 22, 83
locking 102
off 9
setting 63
setting in Contacts 37, 64
vibrate 63
Web 52
Mute 26
on 9
setting up 4
Profiles 107
Programming, over-the-air 9
PUK code 17
viewing assigned 64
Ringer 97
N
see also Ring tones
off 97
Navigation key 4
Non-emergency numbers 85
Numeric mode 33
S
Safety 125
accessory 131
battery 130
R
O
Radio frequency 125
Recent Calls 29
Recent calls 23, 29
deleting 30
OARSS, see over-the-air
programing 9
Over-the-air programming 9
electromagnetic interference
128
medical devices 128
radio frequency 125
P
display time 103
icons 29
Password
141
Index
Security 77
Send key 4
Settings
database 31, 32
icons 31
message forwarding 49
Voice mail 52
resetting 103
mode 31
receiving 52
Shortcuts 95
SIM 5, 15
Numeric mode 33
Symbols mode 33
Word mode 31
Text messages 53
TTY calls 84
baud rate 85
making 84
mode 84
on 84
TTY devices 85
Turbo Dial 24
sending calls to 22, 52
setting up 11, 43
Voice name 24, 36
creating 38
Voice records 79
memory 80
Contacts 35
inserting 6
removing 6
SIM PIN 15, 102
changing 16
W
Waits
requirement 15
unblocking 16, 17
Speakerphone 25
Speed Dial 24, 36, 37
Status messages 111
Symbols mode 33
dialing 81
storing 39
Walkie-Talkie Options 101
Web 4
Web Alerts 54
Web Messaging 52
White Page listings 86
Word mode 31
U
Understanding Status Messages
111
T
T9 Text Input, see text entry
TDD/TTY devices 85
Telecommunications relay
service 85
Text display area 11
Text entry 31
V
Voice Mail
Y
changing password 44
greetings 44
group lists 48
Yellow Page listings 87
142
|