Magnavox MCR220BK User Manual

User guide  
S M A RT . V E RY S M A RT .  
MCR220BK CD CLOCK RADIO  
Read this manual first!  
Return  
If you have any problems, do not attempt  
yourWarranty  
to return this product to the store.  
Registration Card  
within 10 days  
For fast help, call us first!  
1-800-705-2000  
Y
1
6
7
8
9
0
!
@
#
$
%
^
5
4
3
2
1
&
2
X
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
12.  
Use only with a cart, stand,  
tripod, bracket, or table speci-  
fied by the manufacturer, or  
sold with the apparatus.When  
a cart is used, use caution when  
moving the cart/apparatus  
combination to avoid injury  
from tip-over.  
4. Follow all instructions.  
5. Do not use this apparatus near  
water.  
6. Clean only with a dry cloth.  
13. Unplug this apparatus during light-  
ning storms or when unused for long  
periods of time.  
7. Do not block any of the ventilation  
openings. Install in accordance  
with the m anufacturers instruc-  
tions.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
8. Do not install near any heat  
sources such as radiators, heat registers,  
stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the  
safety purpose of  
the polarized or  
grounding-type plug. A  
AC Polarized  
Plug  
polarized plug has two blades with one  
wider than the other. A grounding type  
plug has two blades and a third grounding  
prong.The wide blade or the third prong  
are provided for your safety. If the provid-  
ed plug does not fit into your outlet, con-  
sult an electrician for replacement of the  
obsolete outlet.  
15.Battery usage  
CAUTION  
To  
prevent battery leakage which may result in  
bodily injury or damage to the unit:  
Install all batteries correctly, + and - as  
marked on the unit.  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
Remove batteries when the unit is not  
used for a long time.  
10. Protect the power cord from being  
walked on or pinched particulary at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
EL 6475-E003: 01/6  
11.O nly use attachm ents/accessories  
specified by the manufacturer.  
Class II equipm ent sym bol  
This symbol indicates that the unit has a double  
insulation system.  
LIMITED WARRANTY  
PO RTABLE AUDIO  
One Year Free Exchange  
This product must be carried in for an exchange.  
W HO IS COVERED?  
EXCHANGING A PRO DUCT IN U.S.A.,  
PUERTO RICO O R U.S.VIRGIN ISLANDS...  
Contact your dealer to arrange an exchange. Or, ship the  
product, insured and freight prepaid, and with proof of  
purchase enclosed, to the address listed below.  
Small Product Service Center  
You must have proof of purchase to exchange the product.  
A sales receipt or other document showing that you  
purchased the product is considered proof of purchase.  
Attach it to this owners manual and keep both nearby.  
W HAT IS COVERED?  
Service Company  
907 Snapps Ferry Road, Plant 2, Building 6  
Greeneville,TN 37743  
Magnavox  
Warranty coverage begins the day you buy your product.  
For one year thereafter, a defective or inoperative product  
will be replaced with a new, renewed or comparable  
product at no charge to you.A replacement product is  
covered only for the original warranty period.When the  
warranty on the original product expires, the warranty on  
the replacement product also expires.  
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied  
warranties, including implied warranties of merchantability and  
fitness for a particular purpose, are limited in duration to the  
duration of this express warranty. But, because some states do  
not allow limitations on how long an implied warranty may  
last, this limitation may not apply to you.)  
W HAT IS EXCLUDED?  
Your warranty does not cover:  
EXCHANGING A PRO DUCT IN CANADA...  
labor charges for installation or setup of the product,  
adjustment of customer controls on the product, and  
installation or repair of antenna systems outside of the  
product.  
Please contact Magnavox at:  
1-800-661-6162 (French Speaking)  
1-800-363-7278 (English Speaking)  
product repair and/or part replacement because of  
misuse, accident, unauthorized repair or other cause  
(In Canada, this warranty is given in lieu of all other  
warranties. No other warranties are expressed or implied,  
including any implied warranties of merchantability or  
fitness for a particular purpose. Magnavox is not liable under  
any circumstances for any direct, indirect, special, incidental  
or consequential damages, howsoever incurred, even if  
notified of the possibility of such damages.)  
not within the control of  
Magnavox.  
reception problems caused by signal conditions or  
cable or antenna systems outside the unit.  
a product that requires modification or adaptation to  
enable it to operate in any country other than the  
country for which it was designed, manufactured,  
approved and/or authorized, or repair of products  
damaged by these modifications.  
REMEMBER...  
Please record the model and serial numbers found on the  
product below.Also, please fill out and mail your warranty  
registration card promptly. It will be easier for us to notify  
you if necessary.  
incidental or consequential damages resulting from the  
product. (Some states do not allow the exclusion of  
incidental or consequential damages, so the above  
exclusion may not apply to you.This includes, but is not  
limited to, prerecorded material, whether copyrighted  
or not copyrighted.)  
MODEL # __________________________________  
a product used for commercial or institutional  
purposes.  
SERIAL #  
__________________________________  
W HERE IS EXCHANGE AVAILABLE?  
You may exchange the product in all countries where the  
product is officially distributed by  
Magnavox.  
In countries where  
does not distribute the product,  
Magnavox  
the local Magnavox service organization will attempt to provide  
a replacement product (although there may be a delay if the  
appropriate product is not readily available).  
BEFO RE REQ UESTING EXCHANGE...  
Please check your owners manual before requesting an  
exchange.Adjustments of the controls discussed there may  
save you a trip.  
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.  
Service Solutions Group, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800  
EL6095T002 / MAC5433 / 1-97  
This product complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is subject  
to the following two conditions:  
1. This device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause  
undesired operation.  
L'appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement soumis aux deux  
conditions suivantes:  
1. Cet appareil ne doit pas provoquer d'interférences nuisibles, et  
2. Cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de  
provoquer un fonctionement peu satisfaisant.  
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento dependiente de dos  
condiciones siguientes:  
1. Este aparato no puede provocar interferencia dañina, y  
2. Este aparato debe aceptar cualquier interferenciarecibida, incluyendo las interferencias que  
puedenprovocar un funcionamiento insuficiente.  
Canada  
English:  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as  
set out in the Radio Interference Regulations of the Canadian Department of Communications.  
Français :  
Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils  
numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère  
des Communications du Canada.  
English  
CONTROLS/ INSTALLATION  
% TUNING  
CONTROLS (see figure 1)  
- tunes to a radio station.  
1 AL 1 ( ALARM/ OFF)  
^
TIME/ ALARM  
- toggle to set the times for the clock time, or alarm 1  
or 2.  
-
-
selects CD alarm;  
to cancel or switch off CD alarm.  
2 WAKE-UP TRACK  
& Display  
-
to program to your favorite CD track for wake-up  
track alarm option.  
- shows the clock / alarm times and status of the unit.  
3 SLEEP  
- adjusts timer options for CD / radio;  
POWER SUPPLY  
1. Check if the power voltage, shown on the AC-DC  
adapter plug, corresponds to your local power  
supply. If it does not, consult your dealer or service  
center.  
2. Connect the AC-DC adapter plug to the wall outlet.  
3. To disconnect the set completely from the power  
supply, withdraw the AC-DC adapter plug from the  
wall outlet.  
- switch on radio for timer mode.  
4 REPEAT ALARM/ BRIGHTNESS CONTROL  
-changes the brightness of the display window;  
-switches off the alarm for a 9 minute period;  
-switches off radio / CD timer (SLEEP).  
5 Power cord  
-connect AC-DC adapter plug to wall outlet.  
6 Coil antenna  
-antenna to improve FM reception.  
The serial and production number are located on  
the bottom of the set.  
7 CD door  
- lift here to open / close CD door  
Standby power consumption (clock mode)..........2W  
8 ALARM RESET (CD/ RADIO OFF)  
- stops CD / radio playback;  
- switches off radio / CD timer (SLEEP);  
- stops the active buzzer, radio or CD alarms for 24  
hours.  
MEMORY BACKUP  
The memory backup conveniently allows your clock and  
alarm time settings to be stored for up to 3 minutes when  
there is a power interruption e.g. AC power failure.  
The complete CD clock radio and lighted display will be  
switched off. As soon as the power supply returns, the  
display will indicate the correct time.  
9 AL 2 (  
- selects radio  
ALARM/ OFF)  
/ buzzer  
alarm mode;  
- to cancel or switch off radio / buzzer alarm.  
If power supply returns after 3 minutes you will need to  
re-enter the clock and alarm time settings.  
0 VOLUME 3 , 4  
- adjusts the sound level.  
! PLAY / PAUSE 2;  
BASIC FEATURES  
- starts / pauses CD playback.  
Display brightness  
@ DOWN, UP , §  
- adjusts clock / alarm times  
- skips CD tracks / searches for a particular passage.  
1. Toggle REPEAT ALARM/ BRIGHTNESS CONTROL.  
yThe brightness of the display toggles between:  
low bright low  
# Tuning indicator  
- shows the radio frequency of your selected  
waveband.  
Volume  
Press  
4
or  
3
to adjust the  
volume level. The volume  
level uo: is indicated as a  
number from 0-32.  
$ RADIO ON (FM/ AM)  
- switches on the radio;  
- selects the radio waveband.  
SETTING TIMES  
CD  
SETTING THE CLOCK AND ALARM TIMES  
CD PLAYBACK  
The time is displayed using the 12 hour clock (PM  
indicator lights up = PM, off = AM).  
1. Press and hold down  
TIME/ ALARM until the  
clock or alarm time display  
flashes, then release  
1. Insert a CD with the printed side facing up, and  
close the door.  
2. Press PLAY/ PAUSE 2; to start playback.  
yDisplay shows:  
'Cd: --' and the total  
number of tracks, then  
your current track  
number, before  
returning to clock time.  
Other possible CD indications before  
returning to clock time:  
TIME/ ALARM.  
Press TIME/ ALARM repeatedly to toggle  
between the time or alarm displays  
2. Press and hold down / § to fast adjust both  
the hours and minutes settings.  
3. Release / § when you  
have reached the desired  
setting.  
ydooris shown if the CD door is not closed.  
ynoCdis shown if no CD has been inserted /  
inserted incorrectly.  
ynFCdis shown if the CD-R(W) is non-  
finalized  
yIf you need to adjust  
the time slowly, minute by minute, press and  
release / § repeatedly.  
yAfter several seconds, the time setting is  
confirmed when the display stops flashing.  
4. Repeat steps 1-3 for each of the clock or alarm  
(AL1, AL2) settings.  
yErrindicates a general error in operation of  
the set.  
3. Adjust the sound with  
4
or  
3.  
4. To interrupt, press 2;  
yCD icon  
flashes.  
Alarm time display  
5. Press 2; again to resume playback.  
If you have set both alarms, the standby alarm time  
display will show the earlier of the two alarm times  
as priority.  
6. Press ALARM RESET to stop playback.  
Note: If CD playback is paused for more than 15  
minutes and no controls are pressed, the set  
automatically goes to standby mode.  
E.g. if AL1 = 6:00 and AL2 = 5:45, then the standby  
alarm display will show the AL2 time 5:45.  
Selecting a different track during playback  
The track number appears briefly in the display when  
you press or § to skip tracks.  
Press § once or more to skip to the next track(s).  
Press once and playback will return to the  
beginning of the current track.  
Press more than once to skip to previous tracks.  
CD/ RADIO  
SETTING ALARM OPTIONS  
Finding a passage within a track  
1. During playback, press and hold down  
yThe CD is played at high speed and low  
Radio Alarm:  
or  
§
If you have selected the radio alarm, make sure  
you have tuned properly to a station.  
volume; the display will show 'Cd:' and your  
current track number.  
2. Release  
or  
§
when you recognize the passage  
2. Read the following section if you want to select  
you want.  
the WAKE-UP TRACK alarm option.  
yNormal CD playback and standby clock time  
resumes.  
Selecting CD WAKE-UP Alarm Mode  
You can program and select a CD track number  
between 1-99, when the set is in the standby or radio  
playback mode.  
However, if the track number programmed does not  
exist on your CD, the CD will start playback from the  
first track during the alarm call.  
RADIO  
1. Press RADIO ON (FM/ AM) to switch on the  
radio.  
yDisplay shows 'tu' before returning to clock  
time.  
2. Press RADIO ON (FM/ AM) again if you wish to  
change waveband.  
3. Adjust the sound using  
4. Adjust the TUNING wheel to tune to a radio  
station.  
To improve reception:  
FM: Extend coil antenna at the back of the unit fully  
for optimum reception.  
1. Set the alarm time for AL1.  
2. Insert a CD into the CD compartment.  
3. Press AL 1 to select CD alarm mode.  
4. Press WAKE-UP TRACK to activate favorite track  
programming.  
4
or  
3
5. Press  
or  
§
until the desired track number is  
shown.  
6. Press WAKE-UP TRACK to confirm the selected  
track number.  
yThe display returns to standby clock time.  
7. If you want to review your programmed track  
number, press WAKE-UP TRACK  
AM: Uses a built-in antenna. Direct the antenna by  
adjusting the position of your set.  
5. Press ALARM RESET to switch off.  
SETTING THE ALARM OPTIONS  
Note:  
GENERAL  
The buzzer alarm option will automatically replace  
the CD alarm if you have:  
Two different alarm times, AL 1 and AL 2 can be set  
in the CD, radio or buzzer modes.  
inserted a CD incorrectly;  
inserted a damaged CD;  
forgotten to insert any CD;  
not closed the CD door properly.  
Selecting the Alarm Mode Options  
When selected, the selected alarm mode is shown in  
the display, and the respective AL 1 or 2 button  
lights up.  
1. Select your choice of alarm mode.  
Either press briefly:  
AL1 once for CD alarm  
.
This enables CD  
playback from the first track as your alarm call.  
AL2 once or more for radio  
/
buzzer  
alarm  
AL TIME 2  
C
SWITCHING OFF ALARM  
Gentle Wake Volume  
SLEEP  
CANCELING THE ALARM COMPLETELY  
A sure way of getting up in the mornings, the gentle  
To cancel the set alarm time before it goes off, or  
wake volume for the alarm begins from a fixed gentle during the alarm call:  
volume (10) and gradually increases to a maximum  
higher setting of ( 25.)  
Press AL1 or AL 2 once or more until the selected  
alarm indicator disappears from the display.  
yYou will hear a beep tone to confirm the alarm  
has been cancelled.  
The default low volume is Lo: 10, and the  
maximum volume is HI: 25.  
During the alarm call, if you press  
volume stops increasing immediately.  
The gentle wake volume settings do not affect  
normal CD and radio playback volume level, unless About Sleep  
you have pressed or during the alarm call.  
4
or  
3, the  
SLEEP  
4
3
The CD clock radio has a built-in sleep timer which  
enables the set to be automatically switched off  
during radio or CD playback after a set period of time.  
There are 3 sleep times: 60, 30 and 15 minutes.  
The sleep function does not change the operation of  
your alarm settings.  
SWITCHING OFF THE ALARM  
There are three ways to switch off the alarm. Unless  
you cancel the alarm completely, the 24 HOUR  
ALARM RESET will be automatically selected after  
59 minutes, from the time your alarm time first goes  
off.  
Setting SLEEP  
1. Press 2; (CD) or RADIO ON (radio) to switch on  
the desired mode.  
24 HOUR ALARM RESET  
You can also press SLEEP if you want the timer in  
radio mode.  
If you want the alarm mode to be stopped  
immediately but also wish to retain the same alarm  
setting for the following day:  
2. Select your timer option by  
pressing SLEEP once or  
more until the desired  
option is shown.  
Press ALARM RESET.  
yYou will hear a beep tone to confirm the 24  
hour alarm is reset.  
Display shows SL:and the timer options:  
603015minutes 6030...  
REPEAT ALARM  
3. To cancel the timer function you can either:  
This will repeat your alarm call at 9-minute intervals.  
Press ALARM RESET.  
During the alarm call, press REPEAT ALARM/  
BRIGHTNESS CONTROL.  
Press REPEAT ALARM/ BRIGHTNESS CONTROL.  
Repeat if desired up to an hour.  
Press SLEEP once or more until the sleep function  
is no longer shown.  
Note:  
The selected alarm mode  
indicators flashes throughout the repeat alarm  
duration.  
If you are using the CD alarm mode, CD playback  
resumes at the point where the repeat alarm  
interrupted.  
During the CD alarm, CD playback continues for up  
to an hour unless you cancel / reset the alarm.  
or  
,
MAINTENANCE  
TROUBLESHOOTING  
MAINTENANCE (see figure 2)  
TROUBLESHOOTING  
General  
If a fault occurs, first check the points listed below  
before taking the set for repair.  
If you are unable to remedy a problem by following  
these hints, consult your dealer or service center.  
If you do not intend to use the CD clock radio for a  
long time, withdraw the AC-DC adapter plug from  
the wall outlet.  
Do not expose the set or CDs to humidity, rain,  
sand or excessive heat caused by heating  
equipment or direct sunlight.  
To clean the set, use a soft dry cloth. Do not use  
any cleaning agents containing alcohol, ammonia,  
benzene or abrasives as these may harm the  
housing.  
WARNING:  
Do not open the set as there is a risk of electric shock.  
Under no circumstances should you try to repair the  
set yourself, as this will invalidate the warranty.  
No sound  
Volume not adjusted  
CD player and CD handling  
Adjust the VOLUME  
The lens of the CD player should never be touched!  
Sudden changes in the surrounding temperature  
can cause condensation to form and the lens of  
your CD player to cloud over. Playing a CD is then  
not possible. Do not attempt to clean the lens but  
leave the set in a warm environment until the  
moisture evaporates.  
No operation buttons function  
Electrostatic discharge  
Disconnect the set from the power supply and  
reconnect the set after 5 minutes.  
CD playback does not work  
Always shut the CD door to keep the CD  
compartment dust-free. To clean, dust the  
compartment with a soft dry cloth.  
To clean the CD, wipe in a straight line from the  
center towards the edge using a soft, lint-free  
cloth. Do not use cleaning agents as they may  
damage the disc.  
CD badly scratched or dirty  
Replace/ clean CD  
Laser lens steamed up  
Wait until lens has adjusted to room temperature  
Laser lens dirty  
Clean lens by playing a CD lens cleaning disc  
CD-R(W) is non-finalized  
Use a finalized CD-R(W)  
Never write on a CD or attach any stickers to it.  
Occasional crackling sound during FM  
broadcast  
Weak signal  
Extend coil antenna fully  
TROUBLESHOOTING  
TROUBLESHOOTING  
CAUTION  
Continuous crackling/ hiss disturbance during  
AM broadcast  
Use of controls or adjustments or performance  
of procedures other than herein may result in  
hazardous radiation exposure or other unsafe  
operation.  
Electrical interference from TVs, computers,  
fluorescent lamps, etc.  
Move set away from other electrical equipment  
The alarm does not function  
Alarm time not set  
See section on SETTING THE CLOCK AND ALARM  
TIMES  
Environmental information  
Alarm mode not selected  
See section on SETTING THE ALARM OPTIONS  
nnecessary packing material has been  
omitted to make the packing easy to separate  
into 2 categones: cardboard and paper pulp.  
Your unit consists of materials which can be  
recycled if disassembled by a specialized  
company. Please observe local regulations on  
the disposal of packing materials and old  
equipment.  
Meet Magnavox at the Internet  
MCR220BK  
CLASS 1  
LASER PRODUCT  
3140 115 2903.4  
Printed in China  
W

Maxtor Basics 300GB User Manual
Hummer RD10 User Manual
HP Hewlett Packard HP Workgroup System AWSXCIG 1A User Manual
Freestyle FS80934 User Manual
Franklin Computer Accessories NCC 100 User Manual
FieldServer Profibus DP FS 8700 20 User Manual
Ericsson GF768 User Manual
Ericsson A1228LX User Manual
Audiovox CDM 89100C User Manual
Audiovox CDM 8600 User Manual